Melkior Resources Behemoth Zone Mise A La Masse Survey

Asymmetries in the electrical potential plots indicate that the current input zones are not isolated but have preferred current/conductive channels. The results of the method test indicate that the Mise a la Masse survey method could be used more extensively over the Behemoth Zone and elsewhere on the Carscallen Project. Mise al la Masse testing could also be used to establish inter-connectivity between conductive zones in adjacent drill holes.

The Mise al la Masse testing of the shallowest gold zone encountered in CAR-17-16 (17.50ppm gold over 0.30m @77.75m depth) appears to indicate that the conductive zone extends to the north. CAR-17-13 and CAR-17-14, both of which encountered the same gold zone as CAR-17-16 are located within the defined elevated zone of voltage potential on the Mise a la Masse Map. The continuation of the gold zone encountered in CAR-17-16 to the south is in question as decreasing voltage potential appears more symmetrical in that direction. A structural offset could be responsible for the apparent conductor termination. Historic maps indicate a VLF conductor is co-incident with the gold zone and that this VLF conductor continues 370m south to Highway 101. This historic map also indicates that the VLF conductor extends 480m northwards and is co-incident with a topographic discontinuity that has been demonstrated to be associated with a fault that contains a gold bearing quartz vein by the latest drilling and analytical results.

The "Whaleback" gold showing discovered in 2017 is located in a low lying swampy area 200m due west of CAR-17-13. The "Whaleback" gold showing returned assays up to 9.5 g/ton Au from grab samples. Mineralization is hosted in a silicified cataclastic zone in granite that hosts a multi-episodic quartz vein (Az290, -70E) up to 30 cm wide. Drill hole CAR-17-13 undercut this surficial gold bearing structure at a depth of about 200m. The mineralization in the Whaleback outcrop is at Az290 degree, this orientation is at odds with many other local trend indicators. The 290 trend however is consistent with the trend of AUMO gold zones located about 100m east of CAR-17-16 on Tahoe Canada claims. The Mise a la Masse survey input current directly into the gold bearing zone of the Whaleback outcrop. The Mise a la Masse data for the Whaleback Outcrop survey indicates potential continuity of the conductive zone to the northeast as well as to the east, potentially linking into the AUMO system of gold zones. The Whaleback Outcrop is located about 200m WNW (Az290) from CAR-17-16.

" MDI42A05SE00040 JOWSEY VEIN - 1946

Discovered before 1946, on the Jowsey Denton Gold Mines property, this discretionary

occurrence consists of a vein contained in a north-trending shear in quartz diorite. A 1 inch to 20

ft. trench plan in Timmins assessment file T-10 indicates that the vein yielded gold values up to

0.08 (units unknown) gold in a chip sample."

The Jowsey 1946 showing is located about 270m NNE of the Whaleback outcrop, the current input location was within a secondary structure between two sub-parallel spaced faults about 30m apart that generally trend north-south. These two faults are also subparallel and less than 100m west of to the northern extension of the reported historic VLF anomaly that further south is co-incident with gold mineralization in CAR-17-13 (21.80 ppm gold over 1.6m), CAR-17-14 (31.65ppm gold over 1.6m), CAR-17-16 (17.50ppm gold over 0.30m)

The Mise a la Masse data suggests that the conductive gold bearing zone in the Jowsey 1946 trench is connected via conductive host to the VLF anomaly/fault to the east and that the mineralization in this VLF anomaly/fault extends to the north.

The Mise a la Masse test was conducted with the three rotating input locations to better evaluate the viability of the method within the structural and mineralization setting of Carscallen. Rotating the input current location during the station readings and taking three readings at each station provided a cost-effective way of acquiring sufficient data to interpret the method success.

The Mise a la Masse method appears to provide exploration guidance that could be used to help in drill hole targeting on the Carscallen Project. There are several gold zones where drilling has been conducted unsuccessfully or deferred due to lack of targeting information. These areas include the 1010 South, 1010 North, north end of the ZamZam Zone, south end of the ZamZam Zone, Wire Gold, north end of the Jowsey Zone, Shenkman occurrence. All of these aforementioned areas could potentially benefit from a focused Mise a la Masse survey to generate additional exploration input data.

Jim Deluce, CEO of Melkior remarks, "Melkior continues to advance its exploration plans while endeavoring to minimizing drilling risk. If the Mise a la Masse survey method provides us with a successful exploration targeting tool, enhancing our success, that is what we will do."

Wade Kornik, P.Geo., has approved the information contained in this release. Mr. Kornik is the Exploration Manager of the Company and is Qualified Person as defined by National Instrument 43-101.

ON BEHALF OF THE BOARD

Keith James Deluce, CEO

For more information, please contact:

Melkior Resources Inc.

E-mail: info@melkior.com

Tel: 705-267-4000

The reader is invited to visit Melkior's web site www.melkior.com.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Copyright (c) 2018 TheNewswire - All rights reserved.