• Freitag, 22 November 2024
  • 19:57 Uhr Frankfurt
  • 18:57 Uhr London
  • 13:57 Uhr New York
  • 13:57 Uhr Toronto
  • 10:57 Uhr Vancouver
  • 05:57 Uhr Sydney

Alio Gold Completes Surface Drilling Program at Ana Paula

30.05.2018  |  GlobeNewswire

VANCOUVER, British Columbia, May 30, 2018 (GLOBE NEWSWIRE) -- Alio Gold Inc (TSX:ALO) (NYSE AMERICAN:ALO) (“Alio Gold” or the “Company”), is pleased to provide the final set of drill results from its surface drill program at its 100%-owned Ana Paula project in Guerrero, Mexico. The 3,800 metre surface diamond drill program was initiated in January 2018 and consisted of six drill holes of 600 to 700 metres each targeting the complex breccia extension below the proposed open-pit. Additionally, two 300 metre surface holes were drilled into the near surface hydrothermal breccia to test its southern extension.

The three final holes from the surface drill program (AP-18-286, AP-18-287 and AP-18-288) and one of the two additional holes (AP-18-290) returned positive results from the near surface hydrothermal breccia south of the proposed pit and on the southern edge of the alteration halo. The three surface holes (AP-18-286, AP-18-287 and AP-18-288) also intersected the complex breccia below the proposed pit.

Highlights include:

  • Hole AP-18-286:
    • Hydrothermal breccia south of the proposed pit: 0.89 g/t gold over 34.5m (from 16.3m to 50.8m)
    • Complex breccia below the proposed pit: 1.03 g/t gold over 53.7m (from 478.3m to 532.0m)
  • Hole AP-18-287:
    • Hydrothermal breccia south of the proposed pit: 1.40 g/t gold over 41.0m (from 27.0m to 68.0m)
  • Hole AP-18-288:
    • Hydrothermal breccia south of the proposed pit: 1.24 g/t gold over 64.5m (from 33.1m to 97.7m)
    • Complex breccia below the proposed pit: 1.14 g/t gold over 37.7m (from 690.8m to 728.5m)
  • Hole AP-18-290:
    • Hydrothermal breccia south of the proposed pit (southern extension): 1.49 g/t gold over 19.8m (from 141.8m to 161.6m)

“The final set of drill results from the surface drill program has met our objective to confirm and provide us with additional detail on the extent and continuity of the complex breccia below the proposed pit.” said Greg McCunn, Chief Executive Officer. “In addition, the information has provided us with confidence in our decision to incorporate the underground component into the project scope. The additional two holes that tested the southern extension of the hydrothermal breccia indicate there is the potential to further enhance the overall project economics by incorporating this additional breccia into the overall project design.”

The Company has initiated an extensive exploration program at Ana Paula which includes in addition to the surface drill program:

  • Exploration drilling from an underground decline targeting an extension to the high-grade breccia below the proposed open pit and a skarn target below the breccia (decline construction commenced and is expected to be sufficiently advanced in Q3 2018 to enable commencement of the first phase of the underground diamond drill program);
  • Geophysics reassessment on three high priority targets is underway to confirm drill targets. The targets include the North Area Target which is 150 meters north of the proposed pit, the Jacaranda Zone (Hydrothermal Zone) and the Tejacote Breccia Area. Surface drilling is expected to commence following the completion of the geophysics reassessment; and
  • Regional exploration work on the 56,000 hectare land package including an airborne magnetic survey targeting further breccia or skarn targets (ongoing in 2018).
Current Results from Surface Drilling 2018
Hole NB Azimuth Dip Depth
From
Depth To Au (gpt) Interval
length (m)
Estimated
True Width
AP-18-286 357 -63 16.3 50.8 0.89 34.5 14.1
AP-18-286 56.0 66.6 0.72 10.6 4.3
AP-18-286 107.5 127.0 0.77 19.5 8.0
AP-18-286 206.4 211.6 1.56 5.2 2.1
AP-18-286 272.8 277.4 0.67 4.6 1.9
AP-18-286 320.4 343.4 1.98 23.0 N/A
AP-18-286 351.4 359.1 0.96 7.7 N/A
AP-18-286 373.2 385.2 0.65 12.0 N/A
AP-18-286 415.3 424.2 1.67 8.9 N/A
AP-18-286 434.5 447.7 0.92 13.2 N/A
AP-18-286 478.3 532.0 1.03 53.7 N/A
including 478.3 481.0 2.29 2.7 N/A
and including 485.0 488.2 1.88 3.2 N/A
and including 497.0 515.4 1.33 18.4 N/A
and including 522.4 528.0 1.78 5.6 N/A
AP-18-286 552.0 558.0 0.92 6.0 N/A
AP-18-286 576.0 582.0 2.03 6.0 N/A
including 580.0 581.0 7.74 1.0 N/A
AP-18-287 355 -65 27.0 68.0 1.40 41.0 16.8
AP-18-287 79.0 90.8 0.62 11.8 4.8
AP-18-287 206.0 208.0 1.92 2.0 0.8
AP-18-287 219.0 223.0 0.98 4.0 1.6
AP-18-287 278.0 306.0 2.98 28.0 11.5
including 278.0 290.0 5.28 12.0 4.9
which includes 279.0 280.3 20.10 1.3 0.5
which includes 288.0 290.0 10.00 2.0 0.8
and including 298.0 306.0 2.36 8.0 3.3
which includes 304.0 306.0 6.22 2.0 0.8
AP-18-287 410.0 418.3 0.66 8.3 3.4
AP-18-287 500.5 502.9 1.88 2.4 N/A
AP-18-287 526.7 527.4 3.70 0.7 N/A
AP-18-287 568.3 572.3 1.93 4.1 N/A
AP-18-288 350 -72 33.1 97.7 1.24 64.5 26.5
including 33.1 82.7 1.41 49.5 20.3
and including 89.7 97.7 0.96 8.0 3.3
AP-18-288 234.8 236.2 9.59 1.3 0.5
AP-18-288 254.5 261.2 1.04 6.7 2.7
AP-18-288 279.3 280.7 4.65 1.4 0.6
AP-18-288 478.5 481.7 1.89 3.3 1.3
AP-18-288 551.1 553.2 0.77 2.1 0.9
AP-18-288 577.3 585.0 3.02 7.7 3.2
including 584.4 585.0 25.30 0.6 0.2
AP-18-288 592.5 594.5 2.43 2.0 N/A
AP-18-288 598.9 620.8 0.92 21.9 N/A
including 598.9 601.7 0.77 2.8 N/A
and including 609.6 620.8 1.53 11.2 N/A
which includes 609.6 611.0 4.60 1.4 N/A
which includes 618.3 619.8 3.43 1.5 N/A
AP-18-288 641.8 646.3 1.43 4.5 N/A
AP-18-288 690.8 728.5 1.14 37.7 N/A
including 690.8 695.3 0.65 4.5 N/A
including 700.0 701.0 8.88 1.0 N/A
including 705.8 719.3 0.66 13.5 N/A
including 723.8 728.5 4.20 4.7 N/A
which includes 727.2 728.5 12.80 1.3 N/A
AP-18-289 0 -60 258.5 261.3 1.10 2.8 1.1
AP-18-290 0 -65 79.3 88.3 0.67 9.0 3.7
AP-18-290 96.4 99.9 0.75 3.6 1.5
AP-18-290 112.5 115.5 0.73 3 1.2
AP-18-290 123.0 128.6 0.95 5.6 2.3
AP-18-290 141.8 161.6 1.49 19.8 8.1
including 141.8 145.9 3.27 4.1 1.7
and including 147.4 151.4 2.07 4.1 1.7

Note on true width calculation:
For the complex breccia and surrounding halo mineralization and in the monolithic breccia (MBX), the calculation of a true width is inappropriate since these units are not tabular. For the mineralization outside of these units (i.e. sediments (SED) and intrusive (INTRS)) the true width can be estimated since the mineralization is likely following the stratigraphy.

Co-ordinates
Hole ID Easting Northing Elevation Length
AP-18-286 410122 1997710 1056 599.4
AP-18-287 410150 1997690 1044 602.3
AP-18-288 410152 1997691 1039 761.3
AP-18-289 410154 1997575 1016 301.3
AP-18-290 410117 1997634 1034 296.4

About Alio Gold

Alio Gold is a growth oriented gold mining company, focused on exploration, development and production in Mexico and the USA. Its principal assets include its 100%-owned and operating San Francisco Mine in Sonora, Mexico, its 100%-owned and operating Florida Canyon Mine in Nevada, USA and its 100%-owned development stage Ana Paula Project in Guerrero, Mexico. Located within the highly prospective Guerrero Gold Belt on 56,000 hectares of underexplored land the Ana Paula Project is a high-grade, high margin project currently in the definitive feasibility stage. An underground decline to provide access for an exploration drill program has been initiated. The drill program will target the continuation of the high-grade gold mineralization below the proposed pit which has the potential to significantly enhance the robust economics of the project. The Company also has a portfolio of other exploration properties located in Mexico and the USA.

Qualified Person

The scientific and technical content of this news release has been reviewed and approved by Pierre Desautels, P. Geo, a ‘Qualified Person’ as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects who is an independent consultant to the company.

Quality Assurance/Quality Control

Drill holes reported in this press release were drilled using HQ sized diamond drill bits. Company personal are located at the at the drill site. Contractors and employees of Alio Gold conducted all logging and sampling. The core was logged, marked up for sampling using standard lengths of approximately 1.5 meters. Samples are then collected by sawing a ½ of the HQ core using a diamond saw with the remaining ½ portion retained for inspection at the core logging facility. The samples were catalogued and placed into sealed bags and securely stored at the site until it was shipped to sample preparation laboratory owned by ALS Chemex in Guadalajra, Mexico. The core was dried and crushed and pulverized to 85% passing 75 microns. The pulps were then shipped for assay to the ALS Chemex located in Vancouver, Canada. At that location, the samples were analysed for gold using fire assay with an atomic absorption finish (FA-AA) on a 50 gram charge. Samples returning over 10 grams per tonnes are re-assayed using a fire assay with a gravimetric finish. Samples were also analyzed for a suite of 35 elements using Aqua Regia Inductively coupled plasma atomic emission spectroscopy (ICP-AES). Over limits for silver, arsenic, zinc were re-assayed using a ore grade ICP-AES method. Quality control procedures included the systematic insertion of blanks, duplicates and sample standards into the sample stream. In addition, The Labs inserted their own quality control samples.

Source: ALO

For further information, please contact:
Lynette Gould
Vice President, Investor Relations
604-638-8976
lynette.gould@aliogold.com

Neither the TSX nor its Regulation Services Provider (as that term is defined in the policies of the TSX) nor the New York Stock Exchange MKT accepts responsibility for the adequacy or accuracy of this news release.


Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!



Mineninfo
Alio Gold Inc.
Bergbau
-
-
Copyright © Minenportal.de 2006-2024 | MinenPortal.de ist eine Marke von GoldSeiten.de und Mitglied der GoldSeiten Mediengruppe
Alle Angaben ohne Gewähr! Es wird keinerlei Haftung für die Richtigkeit der Angaben und der Kurse übernommen!
Informationen zur Zeitverzögerung der Kursdaten und Börsenbedingungen. Kursdaten: Data Supplied by BSB-Software.