Step Out Drilling Connects Adriana and Katty Zones
TSX Venture Symbol: COR
OTCQB Symbol: CAMZF
Frankfurt: XC01
VANCOUVER, June 14, 2018 /CNW/ - Camino Minerals Corp. ("Camino" or the "Company") (TSX: COR) is pleased to report results for the final three step out diamond drill holes completed on the Katty Zone ("Katty") and Adriana Zone ("Adriana") at its Los Chapitos copper project ("Chapitos"), located in southern Peru. This drilling has now shown that Katty and Adriana are related and form a single system that is over 1,500 meters long. These zones are part of the larger Diva Structural system which has been traced on surface for over six kilometers.
Selected drill highlights are:
- DCH-064 intersected 0.74% Cu over 12.50 meters, including 1.26% Cu over 3.00 meters;
- DCH-065 intersected 1.34% Cu over 7.60 meters, including 2.02% Cu over 4.50 meters.
Holes DCH-063 and DCH-064 were drilled as step out holes in Katty testing the thickness of the high grade copper oxide mineralization found near the collars of the 2017 drilling. Both holes intersected mineralization starting from surface and showed that the Katty mineralization is associated with a structure which is parallel to the Diva Structure. As with Adriana, the mineralization at Katty is both structurally controlled and extends locally into the surrounding volcanics. It is relatively shallow and currently measures over 200 meters long, up to 40 meters wide, and over 150 meters deep. Interpretation using the ground magnetic survey shows that this structure forms the northern limit of Adriana and may extend much further to the southeast and the northwest.
Hole DCH-065 tested beneath hole DCH-058, both of which are located 100 meters northwest of last year's drilling. The high grade copper mineralization DCH-065 is interpreted to be related to a mineralized splay extending from the Diva Structure at depth. This drilling confirms that Adriana remains open to the northwest where it dives under barren cap rock. Results from the soil geochemistry survey indicates potential for the zone to continue another 300 to 500 meters to the northwest.
Kenneth McNaughton, President and CEO, said, "Our work to date has shown that Chapitos was likely formed under the same conditions as Mina Justa which is located 100 kilometers to the northwest. We are observing the same multiple episodes of alteration, a complex structural history, and copper mineralization being introduced on a regional scale. The fact that both Adriana and Katty have very little surface exposure suggests that any one of the numerous anomalies being defined by the ongoing soil geochemical program has potential to host other significant deposits of copper mineralization. Our prospecting and geochemical studies are focused on the definition of new target areas and will continue over the next couple of months. "
Field crews have started work on the regional soil sampling program and have completed over 75 line kilometers of sampling to date. Analysis is being done on site using a portable XRF, with about 5% of the samples also being sent to the lab for subsequent ICP confirmation analysis. The results for this work will be reported when the program has been completed.
Kenneth C. McNaughton, M.A.Sc., P.Eng., is the Qualified Person (QP) responsible for the Chapitos project.
Updated drill sections and a 3D video of the Adriana and Katty geology solids can be found on the company website at www.caminominerals.com.
Table 1: Selected Diamond Drill Results, (1,2)
Hole Number | Pad # Dip/Azimuth (degrees) | From (meters) | To (meters) | Interval | Total | Soluble |
Katty Zone | ||||||
DCH-063 | Kat - 3 | 2.50 | 13.30 | 10.80 | 0.80 | 0.71 |
Incl. | -45/218 | 2.50 | 7.00 | 4.50 | 1.35 | 1.24 |
DCH-064 | Kat – 3 | 1.30 | 13.80 | 12.50 | 0.74 | 0.70 |
Incl. | -60/218 | 1.30 | 4.30 | 3.00 | 1.26 | 1.24 |
Adriana Zone | ||||||
DCH-065 | Pad - 5 | 49.00 | 56.60 | 7.60 | 1.34 | 1.19 |
Incl. | -82.5/220 | 50.50 | 55.00 | 4.50 | 2.02 | 1.86 |
250.00 | 254.50 | 4.50 | 0.42 | 0.02 | ||
(1) | True thickness to be determined. |
(2) | All samples were submitted for preparation and analysis by ALS Chemex at its facilities in Lima, Peru. All samples were analyzed using multi-digestion with ICP finish and select samples were analyzed for gold using fire assay with AA finish. Samples over 1% copper were reanalyzed using four acid digestion with an ore grade ICP finish. Mineralized samples were analyzed for soluble copper by sequential leaching where they are first agitated at room temperature in a 5% sulphuric acid solution with the copper content measured by AA. The tails from the acid leach are then agitated in a 10% sodium cyanide solution with an AA finish to determine the amount of copper contained in secondary sulphides such as chalcocite and bornite. One in 20 samples was blank, one in 20 was a standard sample, and one in 20 samples had a sample cut from assay rejects assayed as a field duplicate at ALS Chemex in Lima, Peru. |
About Camino Minerals Corporation
Camino is a discovery-oriented mineral exploration company. The Company is focused on the acquisition and development of high-grade copper and precious metal projects. For more information, please refer to Camino's website at www.caminominerals.com.
Cautionary Note Regarding Forward-Looking Statements and Information
This News Release contains "forward-looking information" and "forward looking statements" within the meaning of applicable Canadian and United States securities legislation. Statements contained herein that are not based on historical or current fact, including without limitation statements containing the words "anticipates," "believes," "may," "continues," "estimates," "expects," and "will" and words of similar import, constitute "forward-looking statements" within the meaning of the U.S. Private Securities Litigation Reform Act of 1995.
Forward-looking information may include, but is not limited to, information with respect to our planned exploration activities, the adequacy of our financial resources, the estimation of mineral reserves and resources, the results of future exploration and drilling. Wherever possible, words such as "plans", "expects", "projects", "assumes", "budget", "strategy", "scheduled", "estimates", "forecasts", "anticipates", "believes", "intends", "targets" and similar expressions or statements that certain actions, events or results "may", "could", "would", "might" or "will" be taken, occur or be achieved, or the negative forms of any of these terms and similar expressions, have been used to identify forward-looking statements and information.
Forward-looking information is subject to a variety of known and unknown risks, uncertainties and other factors that could cause actual events or results to differ from those expressed or implied by the forward-looking information, including, without limitation, those risks identified in the Company's annual disclosure materials, filed with the securities regulatory authorities in Canada and available at www.sedar.com. Readers are encouraged to read these materials. Prospective investors should not place undue reliance on forward-looking information.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
SOURCE Camino Minerals Corp.
Contact
and investor inquiries, contact: Ken McNaughton, President and Chief Executive Officer, Phone (604) 566-8778, info@caminominerals.com, http://www.caminominerals.com