Hastings Technology Metals Ltd.: Major Aeromagnetic Target Identified at Yangibana
- Interpretation of aeromagnetic data identifies a major anomaly near Fraser's deposit
- Dimensions 1km by 800m by 400m
- Anomaly strength indicates probable magnetite-rich body
- Potential extensions to Auer and Auer North identified
- Assay results from infill drilling at Fraser's confirm expectations with results including
o 9m at 3.03%TREO including 1.22% Nd2O3+Pr6O11
o 9m at 2.38%TREO including 1.01% Nd2O3+Pr6O11
o 8m at 1.51%TREO including 0.59% Nd2O3+Pr6O11
o 6m at 2.87%TREO including 1.16% Nd2O3+Pr6O11
o 4m at 2.80%TREO including 1.15% Nd2O3+Pr6O11
- Drilling to increase Indicated Resources and thence Probable Reserves commenced at Auer and Auer North
INTRODUCTION
Results from recently-completed infill reverse circulation (RC) drilling at the Fraser's deposit are in line with expectations. RC and diamond drilling are now under way to increase Indicated Resources and thence reserves at the Auer and Auer North deposits.
AEROMAGNETIC ANOMALY
SGC's recent work has concentrated on a number of targets in the Fraser's Southwest area being the area that lies between Fraser's deposit in the east and the Auer and Auer North deposits in the west (see Figure 1 in link below). The major anomaly occurs predominantly in the southern corner of E09/2018 and has been modelled with a significant target as shown in Figures 2 and 3(see link below).
The detailed assessment of this feature has defined an anomalous magnetic feature with a strike length of approximately 1km with a strong magnetic susceptibility. The modelled feature has a depth extent of approximately 800m extending from surface, and a width of approximately 400m. This body has a higher intensity core (darker pink in Figure 3) (see link below) with a strike length of approximately 750m, a depth extent of approximately 650m (from 60m below surface), and a width of approximately 300m.
The strength of the anomaly in the Yangibana environment suggests the presence of a large magnetite-rich body, potentially similar to the magnetite-rich units that host portions of the known rare-earths deposits nearby.
Surface assessment has located evidence of ironstone and samples have been taken for analysis.
A conceptual hole shown in Figures 2 and 3 (see link below) is planned to provide a first test of the anomaly.
SGC also undertook interpretation of the aeromagnetic data further west, identifying potential extensions of 900m to the north of the current limit of the Auer North deposit and 1,200m to the south of the current limit of the Auer deposit.
INFILL DRILLING RESULTS
Assay results have been received for all RC holes drilled at Fraser's deposit as part of the programme to deliver a large composite sample representative of the Bald Hill and Fraser's mineralisation for further metallurgical testwork (see Figure 4 in link below). Results have been in line with expectations with best results shown in Table 1 (see link below). Details of hole coordinates and assays are shown in Appendices 1 and 2 (see link below).
The important Nd2O3+Pr6O11:TREO ratio ranges from 39% to 45% (other than FRRC145), in line with the November 2017 JORC Resource average of 42%. This ratio effects the proportion of the Company's target oxides of neodymium and praseodymium to TREO in the planned mixed rare earths carbonate product.
RESERVE EXPANSION DRILLING
On completion of the programme to recover additional metallurgical samples, both RC and diamond rigs are now focused on a programme to increase Measured and Indicated Resources and then, incorporating additional metallurgical, geotechnical and mining studies, to increase total reserves at the Project.
The current drilling programme is centred on the Auer and Auer North deposits with the intention of further adding to the Measured and Indicated Resources at these deposits. Geotechnical and geochemical work, and metallurgical testwork are all progressing with the aim of completion of mining studies and the establishment of further increased Probable Reserves by the end of 2018.
TERMINOLOGY USED IN THIS REPORT
Total Rare Earths Oxides, TREO, is the sum of the oxides of the light rare earth elements lanthanum (La), cerium (Ce), praseodymium (Pr), neodymium (Nd), and samarium (Sm) and the heavy rare earth elements europium (Eu), gadolinium (Gd), terbium (Tb), dysprosium (Dy), holmium (Ho), erbium (Er), thulium (Tm), ytterbium (Yb), lutetium (Lu), and yttrium (Y).
To view tables and figures, please visit:
http://abnnewswire.net/lnk/3C96NIY7
About Hastings Technology Metals Ltd:
Hastings Technology Metals Ltd. (ASX:HAS) is a leading Australian rare earths company, with two rare earths projects hosting JORC-compliant resources in Western Australia.
- The Yangibana Project hosts Probable Reserves totaling 5.15 million tonnes at 1.12% TREO including 0.45% Nd2O3+Pr6O11 within JORC Resources totalling 21.0 million tonnes at 1.17% TREO (comprising Measured Resources of 3.9 million tonnes at 1.19% TREO, Indicated Resources of 8.6 million tonnes at 1.25% TREO and Inferred Resources of 8.4 million tonnes at 1.09% TREO), including 0.40% Nd2O3+Pr6O11.
- The Brockman deposit contains JORC Indicated and Inferred Resources totalling 41.4 million tonnes (comprising 32.3mt Indicated Resources and 9.1mt Inferred Resources) at 0.21% TREO, including 0.18% HREO, plus 0.36% Nb2O5 and 0.90% ZrO2.
- Rare earths are critical to a wide variety of current and new technologies, including smart phones, electric vehicles, wind turbines and energy efficient light bulbs.
- The Company aims to capitalise on the strong demand for rare earths permanent magnets created by expanding new technologies.
Source: Hastings Technology Metals Ltd.
Contact:
Stefan Wolmarans Chief Operating Officer
T: +61-2-9078-7674
Andy Border General Manager Exploration
T: +61-2-9078-7674