Quebec Precious Metals intersects 3.22 g/t Au over 31.5 m and 3.59 g/t Au over 27 m at Sakami, extending the gold mineralization on strike by 100 m
![Quebec Precious Metals intersects 3.22 g/t Au over 31.5 m and 3.59 g/t Au over 27 m at Sakami, extending the gold mineralization on strike by 100 m](https://www.minenportal.de/media/goldseiten-news.jpg)
- PT-18-116: 3.89 g/t Au over 14.9 m including 4.26 g/t Au over 11.9 m
- PT-18-118: 3.22 g/t Au over 31.5 m including 5.11 g/t Au over 15.0 m
- PT-18-120: 3.59 g/t Au over 27.0 m including 5.06 g/t Au over 15.0 m
- PT-18-127: ended at 502 m with 2.04 g/t Au over 2.5 m
- Drilling to date has outlined a mineralized area of 800 m long by 450 m wide along dip and to a depth of 400 m below surface.
- There is a significant potential for further extending mineralization at depth and to the west.
MONTREAL, Sept. 10, 2018 - Quebec Precious Metals Corporation (TSX.V: CJC, FSE: YXEN, OTC-BB: CJCFF) (“QPM” or the “Company”) is pleased to provide an update on the 2018 exploration program on its 100% owned flagship Sakami project, and located in Eeyou Istchee James Bay, Quebec. Significant drill results for the entire program are provided in the table below; including drill coordinates, two figures and quality assurance and quality control information. A total of 7,226 m of drilling was completed in 21 drill holes. The last hole of the campaign (PT-18-127) ended in mineralization with 2.04 g/t Au over 2.5 m. This is one of the deepest holes drilled suggesting potential for further extending mineralization at depth. The possibility to re-enter the hole to test the full extent of the mineralization will be evaluated.
Table 1 – Mineralized intersections from drill program and drill hole
coordinates
(last results received and reviewed in August 2018).
Hole UTM E UTM N Length (m) Azimuth Dip From (m) To
(m) Interval
(m) Au g/t
PT-18-107 375310 5895040 312.0 3.4 -66 250.5 256.5 6.0 1.31
Including 253.5 256.5 3.0 1.74
PT-18-107 264.0 265.5 1.5 1.28
PT-18-107 289.5 291.0 1.5 1.49
PT-18-108 375213 5894986 363.0 2.0 -66 285.0 313.5 28.5 0.62
Including 304.5 313.5 9.0 1.13
Including 309.0 313.5 4.5 1.46
PT-18-108 319.5 325.5 6.0 1.23
PT-18-109A 375110 5895020 399.0 2.9 -69 295.5 358.5 63.0 1.10
Including 300.0 315.0 15.0 3.08
Including 304.5 309.0 4.5 5.31
Including 304.5 310.5 6.0 4.81
PT-18-110 375053 5894981 432.0 359.5 -64 343.5 354.0 10.5 1.78
Including 348.0 354.0 6.0 2.15
PT-18-111 375008 5894947 501.0 3.5 -68 385.5 390.0 4.5 3.25
PT-18-111 399.0 400.5 1.5 1.27
PT-18-111 415.5 418.5 3.0 2.42
PT-18-111 445.5 450.0 4.5 1.14
PT-18-112 375099 5894918 480.0 357.2 -70 403.5 415.5 12.0 0.81
PT-18-113 375162 5894871 472.5 357.9 -68 406.5 445.5 39.0 0.69
Including 406.5 411.0 4.5 2.98
PT-18-113 444.0 445.5 1.5 3.40
PT-18-114 375357 5894964 362.0 2.0 -64 286.5 309.0 22.5 1.00
Including 294.0 309.0 15.0 1.23
PT-18-115 375403 5894953 414.0 358.7 -66 270.0 277.5 7.5 1.59
PT-18-115 306.0 307.5 1.5 2.53
PT-18-115 412.5 414.0 1.5 3.16
PT-18-116 374962 5894910 485.0 352.7 -66 423.1 438.0 14.9 3.89
Including 423.1 435.0 11.9 4.26
PT-18-117 375402 5895126 213.0 3.0 -61 154.5 157.5 3.0 4.72
PT-18-118 375244 5895185 174.0 2.0 -55 103.5 135.0 31.5 3.22
Including 106.5 135.0 28.5 3.47
Including 112.5 127.5 15.0 5.11
Including 114.0 120.0 6.0 6.66
PT-18-119 375216 5895202 193.5 357.4 -52 115.5 117.0 1.5 1.09
PT-18-119 124.5 136.5 12.0 1.49
PT-18-119 142.5 151.5 9.0 1.34
PT-18-119 163.5 165.0 1.5 1.15
PT-18-120 375216 5895202 204.0 357.4 -65 117.0 144.0 27.0 3.59
Including 118.5 133.5 15.0 5.06
Including 118.5 129.0 10.5 6.12
PT-18-120 201.0 204.0 3.0 1.43
PT-18-121 375167 5895181 240.0 346.8 -61 150.0 178.5 28.5 0.98
Including 150.0 156.0 6.0 2.05
PT-18-122 375088 5895144 279.0 2.0 -64 217.5 235.5 18.0 2.05
Including 220.5 231.0 10.5 2.41
PT-18-123 375366 5895154 171.0 8.4 -60 112.5 117.0 4.5 1.10
PT-18-123 133.5 135.0 1.5 2.67
PT-18-124 375461 5895088 327.0 358.0 -74 148.5 178.5 30.0 0.99
Including 148.5 156.0 7.5 1.45
Including 169.5 178.5 9.0 1.57
PT-18-124 232.5 238.5 6.0 2.38
PT-18-125 375258 5894999 339.0 356.1 -63 277.5 280.5 3.0 1.49
PT-18-125 295.5 304.5 9.0 1.78
Including 301.5 304.5 3.0 3.70
PT-18-125 316.5 319.5 3.0 1.40
PT-18-126 375307 5894971 354.0 358.4 -64 289.5 309.0 19.5 2.17
Including 289.5 300.0 10.5 3.12
PT-18-126 333.0 336.0 3.0 2.15
PT-18-127 374910 5894910 512.1 353.3 -69 467.2 512.1 44.9 0.59
Including 471.0 480.0 9.0 1.04
Including 499.5 502.0 2.5 2.04
Footnotes:
1. True widths are estimated based on drill angle and interpreted geometry of mineralization and range from 70% to 95% of the drilled length.
2. All gold values are uncut.
Two figures accompanying this announcement are available at:
http://www.globenewswire.com/NewsRoom/AttachmentNg/72a8a2ab-fe4e-49ae-a98a-a4584e253a99
http://www.globenewswire.com/NewsRoom/AttachmentNg/b2712f7e-8ce9-4802-893c-95dbc7b126e6
The technical committee comprised of members from Goldcorp Inc. (“Goldcorp”) and QPM has held recently its first meeting to review the 2018 results and will carry of a field visit shortly to plan and approve the next exploration and expansion drilling program at Sakami as well as benefit from Goldcorp’s technical expertise and knowledge.
The 2018 drilling program was designed based on the recommendations presented in the NI 43-101 technical report prepared by SGS Canada Inc. for Canada Strategic Metals Inc. (now and Matamec Explorations Inc. (now the Company) with a date of issue of November 24, 2017. The program was managed by Consul-Teck Exploration Minière Inc. of Val-d'Or, Quebec who supervised the program and logged and sampled the core.
About Quebec Precious Metals Corporation
QPM is a new gold explorer with a large land position in the highly-prospective Eeyou Istchee James Bay region, Quebec, near Goldcorp's Éléonore gold mine. QPM’s flagship project is the Sakami project with significant grades and well-defined drill-ready targets, to advance rapidly to the mineral resource estimate stage.
Quality Assurance/Quality Control
Quality assurance and quality control procedures were implemented to ensure best practices in sampling and analysis of the core samples. The drill core was logged and then split, with one-half sent for assay and the other retained in the core box as a witness sample. Duplicates, standards and blanks were inserted regularly into the sample stream. The samples were delivered, in secure tagged bags, directly the ALS Minerals laboratory facility in Val-d'Or, Quebec. The samples are weighed and identified prior to sample preparation. All samples are analyzed by fire assay with AA finish on a 30 g sample (0.005-10 ppm Au), with a gravimetric finish for assays over 10 ppm Au.
Qualified Person
Jean-Sébastien Lavallée (OGQ #773), géo., Vice-President Exploration of the Company and a “qualified person” as defined by National Instrument 43-101 - Standards of Disclosure for Mineral Projects, has reviewed and approved the technical content of this release.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
For more information please contact:
Quebec Precious Metals Corp.
Jean-François Meilleur Normand Champigny
President Chief Executive Officer
Tel.: 514 951-2730 Tel.: 514 979-4746
jfmeilleur@qpmcorp.ca nchampigny@qpmcorp.ca
Paradox Public Relations
Tel: 514 341-0408