Victory Metals Drilling at Iron Point Expands Vanadium Footprint to Over 700 Meters in Diameter

VANCOUVER, March 19, 2019 - Victory Metals Inc. ("TSX-V:VMX") ("Victory" or the "Company") is pleased to announce assay results from an additional 22 reverse circulation ("RC") holes completed at its Iron Point Vanadium Project, located 22 miles east of Winnemucca, Nevada. Victory has now released results for 38 RC holes from a planned program of 69 RC holes and 4 diamond drill holes. 

The 22 drill holes reported today include both vertical and angle holes and are focused in the central to northern extent of the historical vanadium mineralized zone (see Figure 1). The majority of the holes are shown in three east-west cross sections (see Figures 2-4, Sections C-C', D-D', and E-E'), which continue to demonstrate the excellent continuity and flat lying nature of vanadium mineralization in a large and growing area. Section line C-C' partially overlays the holes previously released on section line A-A' (see Figure 1), and also bisects the north-south holes on cross section line B-B' (see Figure 1), the results for which were previously released (see Victory's February 28, 2019, and March 6, 2019, news releases).

Highlights

• New high-grade RC drill results include:
  
  
• • 20 meters grading 0.60% V₂O₅ in VM-9
    
  • 26 meters grading 0.59% V₂O₅ (including 3 meters grading 0.84% V₂O₅) in VM-67
    
  • 33 meters grading 0.48% V₂O₅ in VM-75

As indicated by the initial sets of holes, these latest intercepts are consistent with two flat-lying higher grade vanadiferous horizons, referred to as the Upper High Grade and New High Grade Zones, which occur within a broader and extensive envelope of lower grade mineralization that starts at surface and extends down to a depth of at least 175 meters. Intercepts of this broader envelope include:

• Continuity of mineralization in both the lower grade vanadium envelope and the two high-grade zones continues to be apparent. By combining previously announced section A-A' and section C-C', vanadium mineralization shows an east-west strike of 700 meters. The north-south extension of mineralization is similarly around 600 meters, with expansion potential to the south and northwest.
  
  
• Sections C-C', D-D', and E-E' show that vanadium mineralization is open to the west. Hole VM-78 represents the western most permitted hole under Victory's Notice and importantly shows strong mineralization. An historical hole drilled by Aur in 1997 is located 400 meters further to the west of VM-78 and returned anomalous vanadium mineralization. Further definition drilling is planned to better understand the extent of mineralization to the west.

Collin Kettell, CEO of Victory, stated, "Iron Point's vanadium footprint is proving to be large and is poised for further expansion. Victory's drill program was designed to test the historical drilling by Newmont and Aur, to assess the lateral and vertical extent of the deposit, and to confirm the continuity and grade of the mineralization. Victory's holes have penetrated deeper than Newmont, intersecting the highest grades to date on the project. Continuity of mineralization in both the Upper High Grade Zone and New High Grade Zone continues to be excellent. Mineralization appears to be still open to the west and northwest, as well as to the south and east.

The 38 RC drill results released to date outline a vanadium mineralized zone that is approximately 700 meters in diameter. We eagerly await further assays from the remaining 35 holes."

Drill Results

Assay results for intercepts released today are reported in % V₂O₅. Intercept lengths are deemed to be true thickness given the flat nature of the mineralized zones being tested by vertical holes. Intercept lengths are reported as an Overall Length, which includes all assay intervals within the vanadium blanket zone (at a 0.09% V₂O₅ minimum grade), and also as individual zone intercepts reported as aggregate lengths comprised of samples grading 0.25% V₂O₅ and greater. All intercept lengths have been reduced to true thickness lengths as currently defined by the dip of mineralized horizons shown in Figures 2, 3, and 4.

Table 1

Drill holes VM-13i, VM-24i, VM-66, and VM-68, were assayed but did not return any significant vanadium mineralization. VM-13i and VM-24i were both eastward-directed angle holes that appear to have drilled into an old alluvial channel that eroded part of the Vinini Formation, possibly during development of the ancestral Humboldt River drainage. VM-66 drilled barren intrusive rock, while VM-68 cut a monotonous, strongly metamorphosed pelitic phyllite that might not be part of the Vinini Formation.

QA/QC and Qualified Person

The Victory drilling program was directly supervised in the field by the QP and other site geologists working for Victory. All samples were split at the drill site using a Gilson bar splitter and Jones riffle splitter, with two samples per 5-foot (1.52m) sample interval collected and placed into heavy plastic bags together with sequentially numbered sample tags. A 2kg sample was collected for assay, while a 4kg reference sample was kept on-site. Three different vanadium standards (71 ppm V, 320 ppm V, and 5172 ppm V) and coarse blank samples were purchased from Minerals Exploration and Environmental Geochemistry (MEG) Inc. of Reno, NV. Victory site geologists inserted field blank, standard, and duplicate samples into the drill sample stream per NI 43-101 guidelines, maintaining a 1-in-20 insertion rate for each of the field blank, standard, and duplicate samples such that every 7^th sample is a control sample. Field duplicate samples were split from the 4kg reference samples using a Jones riffle splitter. 

Drill samples were transported by Victory personnel to locked storage sheds rented by Victory and located in Golconda, NV, about 14km west of the project area. Samples were picked up in Golconda by American Assay Laboratories utilizing its own truck and driver and transported directly to American Assay's facility in Reno, NV. At American Assay Laboratories, the samples were crushed to 70% passing 2mm, and then a 0.3km split was ground to 85% passing 75 micron. A 0.5gm split was digested in a 5 acid process (ICP-5A035 method uses HNO3, HF, HClO4, HCl, H3BO3) and analyzed via ICP-OES. The detection limit for vanadium is 1ppm, the upper limit is 10,000ppm, and sample results are reported in PPM V. As a separate QAQC check, American Assay inserted laboratory standards, blanks, and duplicates into the sample stream. American Assay Laboratories is accredited by the International Accreditation Service, which conforms with requirements of ISO/IEC 17025:2005.  

Victory is currently using ALS Chemex in British Columbia to perform umpire assays on 1-in-20 drill pulps obtained from American Assay Laboratories and submitted to the ALS Chemex facility in Reno, NV. ALS Chemex employs a four-acid digestion process (ME-ICP61m method), so Victory is re-numbering the pulp samples and inserting the same field standard samples into the sample stream in order to better compare results between the two labs.

The scientific and technical information in this news release has been reviewed and approved by Calvin R. Herron, P.Geo., who is a Qualified Person as defined by National Instrument 43-101.

About Victory Metals

Victory owns a 100% interest in the Iron Point Vanadium Project, located 22 miles east of the town of Winnemucca in Humboldt County, Nevada. The project is located within a few miles of Interstate 80, has high voltage electric power lines running through the project area, and a railroad line passing across the northern boundary of the property. The Company is well financed to advance the project through resource estimation and initial feasibility study work. Victory has a proven capital markets and mining team led by Executive Chairman Paul Matysek. Major shareholders include Casino Gold (50%), and management, directors and founders (25%). Further, over 51% of the issued and outstanding shares of the Company (43,471,014 shares) are subject to an escrow release over three years.

Please see the Company's website at www.victorymetals.ca.

On Behalf of the Board of Directors of
VICTORY METALS INC.

Paul Matysek
Executive Chairman and Director

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Information

This news release contains certain forward-looking information and forward-looking statements within the meaning of applicable securities legislation (collectively "forward-looking statements"). Certain information contained herein constitutes "forward-looking information" under Canadian securities legislation. Generally, forward-looking information can be identified by the use of forward-looking terminology such as "expects", "believes", "aims to", "plans to" or "intends to" or variations of such words and phrases or statements that certain actions, events or results "will" occur. Forward-looking statements are based on the opinions and estimates of management as of the date such statements are made and they are subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed by such forward-looking statements or forward-looking information, including the business of the Company, the speculative nature of mineral exploration and development, fluctuating commodity prices, competitive risks, and delay, inability to complete a financing or failure to receive regulatory approvals. Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. The Company does not undertake to update any forward-looking statements or forward-looking information that are incorporated by reference herein, except as required by applicable securities laws.

View original content to download multimedia:http://www.prnewswire.com/news-releases/victory-metals-drilling-at-iron-point-expands-vanadium-footprint-to-over-700-meters-in-diameter-300814436.html

SOURCE Victory Metals Inc.