Rio Tinto Reports Positive Drill Results from Forum's Janice Lake Copper/Silver Project
Vancouver, British Columbia--(Newsfile Corp. - October 1, 2019) - Forum Energy Metals Corp. (TSXV: FMC) ("Forum") is pleased to announce that it has received positive assay results from the first two holes drilled by Rio Tinto Exploration Canada ("RTEC") on its Janice Lake sedimentary-hosted copper project. Copper mineralization has been significantly expanded along strike and down dip from the initial drilling success by Forum on the Jansem showing last year. Highlights from the first two holes are: - JANL0002 - 0.38% Cu and 2.1g/t Ag over 44.78 metres from 45.22m to 90m, including 0.71% Cu and 4.2g/t Ag over 18 metres from 72m to 90m.
- JANL0001 - 0.18% Cu over 63 metres from 19m to 82m
Rio Tinto Exploration Canada completed 21 holes totalling 5,209 metres this summer under an Option Agreement to earn an 80% interest in the Janice Lake project by spending $30 million in exploration. Nine holes have been completed on the Jansem target, nine on the Janice target and three on the Kaz target (Figure 1). Results from the remaining holes will be reported once received from RTEC.
Drill Hole Summary (Figure 2 & Table 1)
- Hole JANL0001 was drilled to a depth of 261 metres and intersected 0.18% Cu over a 63 metre interval between 19m and 82m. It is located approximately 100m to the north-northwest of FEM-01 to intersect mineralization down dip from the intercept drilled by Forum last summer of 18.5 m (59.0 to 77.5m downhole depth) grading 0.94% Cu and 6.7 g/t Ag including 5.2 metres grading 2.22% Cu and 16.5 g/t Ag.
- Hole JANL0002 was drilled to a depth of 219 metres and intersected 0.38% Cu and 2.1 g/t Ag over a 44.78 metre interval between 45.22m and 90m in depth, including 0.71% Cu and 4.2 g/t Ag over an 18 metre interval between 72m and 90m. It is located 150m along strike to the southwest of FEM-01.
With these first two drill holes, the mineralized zone at Jansem is now a minimum of 294m in strike length, 130m in width, and with an estimated true thickness varying from several metres to more than 50m. Drill holes were orientated to crosscut the stratigraphy as close as possible at right angles, as the interpretation is that the copper is mostly stratabound.
Table 1: Assay results from Jansem target
To view an enhanced version of Table 1, please visit:
https://orders.newsfilecorp.com/files/4908/48340_a722191244795bac_006full.jpg
All drill core samples have been sent to ALS Global in Vancouver, BC for assay. Ken Wheatley, P.Geo. and Forum's VP, Exploration and Qualified Person under National Instrument 43-101, has reviewed and approved the contents of this news release.
Figure 1: Location of the Target Areas on the Janice Lake Project
To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/4908/48340_a722191244795bac_004full.jpg
Figure 2: Drill Hole Locations on the Jansem Target Red dots are the two RTEC holes reported in this release. The blue dots are the four Forum holes from 2018. Large black dots are 2019 RTEC holes and small black dots are historic holes.
To view an enhanced version of Figure 2, please visit:
https://orders.newsfilecorp.com/files/4908/48340_a722191244795bac_005full.jpg
Quality Control/ Quality Assurance
Core samples were sawed in half, keeping the half with the reference line for orientated core in the box. Samples averaged 2 metres in length through the mineralized zone, 4 metres in length in the unmineralized zone, however these lengths varied depending on stratigraphy, alteration or mineralization. Standards were introduced after every 20th sample, using a high grade, low grade or unmineralized, depending on the surrounding core. Duplicates were also introduced on every 20th sample, quartering the core. Blanks were used for the first sample of the hole and at the beginning and end of a mineralized interval, using certified rose quartz. The first two holes of this drill program had blank material inserted after every sample that had visual chalcocite and native copper to determine the potential smear effect. This would allow to modifications in the sample preparation for future holes in this program.
A 4-acid digestion was used on the samples at ALS lab in Vancouver, followed by analysis by ICP-MS (the ME-MS61L package). Higher grade samples will be run again through copper screen using the coarse reject material.
About Forum Energy Metals
Forum Energy Metals Corp. (TSXV: FMC) explores for energy metals, including copper, nickel, platinum, palladium and uranium in Saskatchewan, Canada's Number One mining province. In addition, Forum has also established a strategic land position in the Idaho Cobalt Belt. For further information: www.forumenergymetals.com
ON BEHALF OF THE BOARD OF DIRECTORS
Richard J. Mazur, P.Geo.
President & CEO
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
For further information contact:
NORTH AMERICA
Rick Mazur, P.Geo., President & CEO
mazur@forumenergymetals.com
Tel: 778-772-3100
Craig Christy, VP Corporate Development
cchristy@forumenergymetals.com
Tel: 250-863-0561
UNITED KINGDOM
Burns Singh Tennent-Bhohi, Director
burnsstb@forumenergymetals.com
Tel: 074-0316-3185
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/48340