• Freitag, 20 Dezember 2024
  • 13:05 Uhr Frankfurt
  • 12:05 Uhr London
  • 07:05 Uhr New York
  • 07:05 Uhr Toronto
  • 04:05 Uhr Vancouver
  • 23:05 Uhr Sydney

O3 Mining Intersects 3.1 g/t au Over 7.8 Metres and Identifies a New Zone Within the Skarn Corridor on the Alpha Property

20.12.2019  |  GlobeNewswire

TORONTO, Dec. 20, 2019 - O3 Mining Inc. (TSX.V: OIII) ("O3 Mining" or the "Corporation") is pleased to provide new results from the ongoing drilling program on the Alpha property, located 5 kilometres (km) southeast of Val D’Or, Quebec.

Current drilling on the Alpha property has identified a new mineralized zone within the Skarn Corridor approximately 400 metres north of the Cadillac Larder Lake Fault. The Alpha property comprises up to four different corridors of mineralization, namely Cadillac, Skarn, Anamaque and Sigma-Lamaque (Figure 1). These corridors group mineral occurrences showing comparable mineralization styles that are spatially located along specific structural corridors.

New analytical results include 3.1 g/t Au over 7.8 metres in O3AL-19-273, within the new skarn-type zone (Figure 2). O3 Mining President and Chief Executive Officer, Jose Vizquerra Benavides, commented: “This result confirms the concept of the skarn corridor and opens the potential for a new zone to the north of the Cadillac Corridor. O3 Mining will continue to demonstrate the continuity of this new zone.”

Table 1: Drill Hole Intercepts (only intercepts above 5 g/t Au * m are reported)

Drill Hole ID From
(m)
To
(m)
Length
(m)
Au uncut
(g/t)
Mineralized Zone
CAX -19-020 312.0 312.9 0.9 8.5 Pontiac
and 375.8 376.7 0.9 13.5
OAX-19-263 298.1 299.1 1.0 6.3 Orenada Zone 4
O3AL-19-273 125.7 133.5 7.8 3.1 New Skarn
O3AL-19-295 175.6 177.4 1.8 3.2 Pontiac


Table 2: Drill Hole Details

Drill Hole ID Azimuth (˚) Dip (˚) Length (m) UTM E UTM N
CAX-19-017 196 -50 450 295536 5326008
CAX-19-018 196 -50 444 295737 5326046
O3AL-19-270 196 -50 201 296928 5325824
O3AL-19-273 196 -58 465 297278 5325922
O3AL-19-295 196 -48 498 296270 5325908
O3CE-19-020 196 -50 429 295160 5326347
O3CE-19-021 196 -50 288 295090 5326157
OAX-19-263 196 -50 330 297921 5325628
OAX-19-264 196 -50 558 298150 5325767
OAX-19-265 16 -60 428 298150 5325767
OAX-19-267 360 -55 486 298306 5325701
OAX-19-268 360 -50 516 297814 5325797

Drill hole O3AL-19-273 features strongly chloritized graywacke and porphyritic dyke containing 1% pyrrhotite, sphalerite and chalcopyrite veinlets. The Skarn Corridor, which extends over 15 km across the Alpha property, contains the Akasaba and Mid Canada Au-Cu deposits as well as several other Au-Cu mineral occurrences, all related to mafic volcanic and intrusive rocks. The alteration assemblage at these occurrences includes garnet, chlorite, epidote, magnetite and pyrrhotite, typical of skarn deposits.

Figure 1: Alpha property map
https://www.globenewswire.com/NewsRoom/AttachmentNg/c3da0e9a-82e8-4bcf-bdbc-a494fc6665fa

Figure 2: Epsilon, Bulldog and Pontiac Sector map
https://www.globenewswire.com/NewsRoom/AttachmentNg/984a8db7-744c-4806-969b-62638493e67a

Qualified Person
The scientific and technical content of this news release has been reviewed, prepared and approved by Mr. Sebastien Vigneau, P.Geo. (OGQ #993), Exploration Manager, who is a "qualified person" as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects ("NI 43-101").

Quality Control and Reporting Protocols
True width determination is currently unknown but is estimated at 65-80% of the reported core length interval for the zones. Assays are uncut except where indicated. Intercepts occur within geological confines of major zones but have not been correlated to individual vein domains at this time. Half-core samples are shipped to Agat laboratory in Val D’Or, Quebec and Mississauga, Ontario for assaying. The core is crushed to 75% passing -2 mm (10 mesh), a 250 g split of this material is pulverized to 85% passing 75 microns (200 mesh) and 50 g is analyzed by Fire Assay (FA) with an Atomic Absorption Spectrometry (AAS) finish. Samples assaying >10.0 g/t Au are re-analyzed with a gravimetric finish using a 50 g charge. Commercial certified standard material and blanks are systematically inserted by O3 Mining’s geologists into the sample chain after every 18 core samples as part of the QA/QC program. Third-party assays are submitted to other designated laboratories for 5% of all samples. Drill program design, Quality Assurance/Quality Control ("QA/QC") and interpretation of results is performed by qualified persons employing a QA/QC program consistent with NI 43-101 and industry best practices.

About O3 Mining Inc.
O3 Mining is an emerging consolidator of exploration properties in prospective gold camps in Canada – focused on projects in Quebec and Ontario - with a goal of becoming a multi-million ounce, high-growth company. The Corporation's goal is to become one of the premier gold exploration companies in Canada.

O3 Mining is well-capitalized and holds a 100% interest in a number of properties in Quebec (435,000 hectares) and Ontario (25,000 hectares). O3 Mining controls 61,000 hectares in Val D'Or and over 50 kilometres of strike length of the Cadillac Larder Lake Faut. The Corporation's projects host resources of 2,066,154 gold ounces of measured and indicated resources at 1.40 g/t Au and 1,059,057 gold ounces of inferred resources at 2.95 g/t Au in Val D'Or area, and also holds the Garrison project in Ontario with over 1,570,000 gold ounces of measured and indicated resources at 1.12 g/t Au. O3 Mining also has a portfolio of assets in the James Bay and Chibougamau regions of Quebec and in the Hemlo district in Ontario.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein.

For further information on O3 Mining, please contact:
José Vizquerra Benavides
President, CEO and Director
Telephone: (416) 363-8653


Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!



Mineninfo
O3 Mining Inc.
Bergbau
A2PNTH
CA67113B1085
Copyright © Minenportal.de 2006-2024 | MinenPortal.de ist eine Marke von GoldSeiten.de und Mitglied der GoldSeiten Mediengruppe
Alle Angaben ohne Gewähr! Es wird keinerlei Haftung für die Richtigkeit der Angaben und der Kurse übernommen!
Informationen zur Zeitverzögerung der Kursdaten und Börsenbedingungen. Kursdaten: Data Supplied by BSB-Software.