Canada Nickel Company Inc. Announces Discovery of Multiple Palladium-Platinum Zones
Extends PGM Zone by 1.5 km, and Second Nickel Discovery Doubles Total Nickel Mineralization Along Strike by 1.7 km to 3.4 km at Crawford Nickel-Cobalt-Palladium ProjectHighlights
- Hole CR20-32 extended the PGM zone by 1.5 km along strike and intersected 3 separate palladium-platinum zones including the most promising palladium-platinum intersection to date – 2.6 g/t palladium + platinum (1.3 g/t Pd, 1.3 g/t Pt) over 7.5 metres within 1.8 g/t (0.9 g/t Pd, 0.9 g/t Pt) over 12 metres at 123 metres downhole. Assays for target nickel zone for this hole are pending.
- Second nickel discovery – East Zone. Assays from hole CR19-28 yielded the highest grade nickel interval to date – 55 metres of 0.42% nickel and 0.2 g/t palladium + platinum (0.13 g/t Pd, 0.07 g/t Pt) within 256 metres of 0.30% nickel and 0.05 g/t palladium + platinum (0.03 /t Pd, 0.02 g/t Pt). The first two holes (CR19-28 and CR19-31) intersected nickel mineralization in excess of 300 metres wide, confirmed that the East Zone is a faulted continuation of the Main Zone, and doubled the strike length of total nickel mineralization by 1.7 km to 3.4 km. Both holes also confirmed the presence of the PGM Zone adjacent to the East Zone nickel mineralization - hole CR19-28 intersecting 1.7 g/t palladium + platinum (0.8 g/t Pd, 0.9 g/t Pt) over 4.5 metres from 180 metres and hole CR 19-31 intersecting 1.6 g/t (0.7 g/t Pd, 0.9 g/t Pt) over 3.0 metres from 525 metres.
TORONTO, May 19, 2020 - Canada Nickel Company Inc. (TSX-V:CNC) ("Canada Nickel" or the "Company") today announced the results from the latest drill holes at its Crawford Nickel-Cobalt project, including the first two discovery holes on the East Zone, and partial assays from a third hole which is a 1.5 km extension to the PGM Zone on the Main Zone. The new East Zone discovery has only been tested for 1.7 km of its overall 2.6 km interpreted strike length and the original Main Zone remains open to the west and at depth.
Mark Selby, Chair and CEO of Canada Nickel commented "We are very pleased with both the new nickel and multi-zone palladium-platinum discoveries from our first step-out holes at Crawford. These new holes have also yielded both the most promising palladium + platinum (2.6 g/t across 7.5 m) intersection and highest grade nickel zone intersections to date (0.42% nickel + 0.2 g/t palladium + platinum across 55 m). With more than 1.5 km extensions to both the PGM Zone and Nickel Zones and assays pending from another 9 holes which have the potential to further extend the mineralization identified to date, we look forward to continued success as we unlock more targets at our original Crawford property. With the additional properties in the process of being acquired from Noble, we have added a number of nearby targets which we will begin exploring later in the year initially utilizing geophysics to determine the highest priority (based on potential for higher grade mineralization) targets."
Mr. Selby continued "We continue to be encouraged by the results of our drilling program and are committed to establishing Crawford as one of the leading next generation nickel-cobalt sulphide and palladium projects. I extend my sincere thanks to our exploration team for their hard work and the ongoing support we've received from our local contractors including our drilling company NPLH. Our top priority is the safety and wellbeing of our people especially during these challenging times."
The Crawford Nickel-Cobalt Sulphide Project is located in the heart of the prolific Timmins-Cochrane mining camp in Ontario, Canada, and is adjacent to well-established, major infrastructure associated with over 100 years of regional mining activity.
New Nickel Discovery – East Zone
The first two holes of this next phase of exploration drilling (CR19-28 and CR19-31) were drilled along the East Zone, doubling the known total extent of nickel mineralization by 1.7 km to a total of 3.4 km. Both holes intersected large widths of nickel mineralization of 321 metres and 382 metres respectively, with hole CR19-28 ending in mineralization at 573 m. Hole CR19-28 yielded the highest grade nickel interval to date – 55 m of 0.42% nickel and 0.2 g/t palladium + platinum within 256 m of 0.30% nickel and 0.05 g/t palladium + platinum within a total of 0.27% nickel across 321 m. A further 9 holes have been drilled on the East Zone which have assays pending. See Figures 1a, 1b and Table 1 for drilling results.
Similar to the PGM Zone on the Main Zone nickel-palladium resource, both holes intersected palladium-platinum mineralization located at the north contact between the peridotite and pyroxenite layer directly to the north of the main nickel structure. Hole CR19-28 intersected 1.7 g/t (0.8 g/t Pd, 0.9 g/t Pt) over 4.5 m from 180 m and hole CR19-31 intersected 1.6 g/t (0.7 g/t Pd, 0.8 g/t Pt) over 3.0 m from 525 m. See Figure 2 for location of the PGM Zone.
Table 1 – East Zone Nickel Drilling Results, Crawford Nickel-Cobalt Sulphide Project
| DDH ID | From | To | Length | Ni | Co | Pd | Pt | S | Fe |
| (m) | (m) | (m) | (%) | (%) | (g/t) | (g/t) | (%) | (%) | |
| CR19-28 | 252.0 | 573.0 | 321.0 | 0.27 | 0.013 | 0.028 | 0.017 | 0.07 | 6.10 |
| including | 316.5 | 573.0 | 256.5 | 0.30 | 0.013 | 0.032 | 0.018 | 0.08 | 5.77 |
| including | 406.5 | 462.0 | 55.5 | 0.42 | 0.014 | 0.131 | 0.071 | 0.21 | 6.01 |
| CR19-31 | 115.5 | 498.0 | 382.5 | 0.21 | 0.013 | 0.01 | 0.00 | 0.02 | 6.89 |
| including | 226.5 | 387.0 | 160.5 | 0.26 | 0.013 | 0.01 | 0.00 | 0.02 | 6.13 |
| including | 304.5 | 333.0 | 28.5 | 0.31 | 0.013 | 0.02 | 0.01 | 0.04 | 6.07 |
| Note: All holes drilled at a 50 degree inclination. The lengths reported are core lengths and not true widths. Canada Nickel has insufficient information to determine the attitude, either of the ultramafic body or of mineralized zones within it. True widths will be less than the core lengths by a number of factors. |
PGM Zone – Main Zone Extension
The third hole (CR20-32 - only partial assay results were available) was positioned at the northeastern end of the Main Zone, approximately 1.5 km from the nearest previous hole and intersected three separate palladium-platinum zones including the most promising palladium-platinum results to date: 2.6 g/t palladium + platinum (1.3 g/t Pd, 1.3 g/t Pt) over 7.5 m within 1.8 g/t (0.9 g/t Pd, 0.9 g/t Pt) over 12 m from 123 metres. See Figure 2 and Table 2 for summary of the PGM results. Each of the intersections was at a peridotite-pyroxenite boundary which has now been intersected multiple times.
Table 2 – PGM Zone – Drilling Results, Crawford Nickel-Cobalt Sulphide Project, Ontario
| DDH ID | From | To | Length | Pd+Pt | Pd | Pt | Ni | Co |
| (m) | (m) | (m) | (g/t) | (g/t) | (g/t) | (%) | (%) | |
| CR19-28 | 34.5 | 42.0 | 7.5 | 0.4 | 0.1 | 0.2 | 0.05 | 0.006 |
| CR19-28 | 180.0 | 184.5 | 4.5 | 1.7 | 0.8 | 0.9 | 0.03 | 0.009 |
| CR19-31 | 520.5 | 528.0 | 7.5 | 0.8 | 0.4 | 0.4 | 0.04 | 0.011 |
| including | 525.0 | 528.0 | 3.0 | 1.6 | 0.7 | 0.9 | 0.03 | 0.009 |
| CR20-32 | 123.0 | 135.0 | 12.0 | 1.8 | 0.9 | 0.9 | 0.02 | 0.007 |
| including | 123.0 | 130.5 | 7.5 | 2.6 | 1.3 | 1.3 | 0.02 | 0.007 |
| 242.0 | 245.0 | 3.0 | 1.9 | 0.9 | 1.0 | 0.03 | 0.008 | |
| 277.5 | 289.5 | 12.0 | 1.0 | 0.5 | 0.5 | 0.03 | 0.008 | |
| 280.5 | 286.5 | 6.0 | 1.6 | 0.9 | 0.8 | 0.02 | 0.008 |
| Note: All holes drilled at a 50 degree inclination. The lengths reported are core lengths and not true widths. Canada Nickel has insufficient information to determine the attitude, either of the ultramafic body or of mineralized zones within it. True widths will be less than the core lengths by a number of factors. |
Table 3 – Drill Hole Orientation, Crawford Nickel-Cobalt Sulphide Project, Ontario
| DDH ID | Dip | Azimuth |
| (°) | (°) | |
| CR19-28 | -48.0 | 184.0 |
| CR19-31 | -50.0 | 360.0 |
| CR20-32 | -50.0 | 270.0 |
Assays, Quality Assurance/Quality Control and Drilling and Assay Procedures
William E. MacRae, MSc, P.Geo., a Qualified Person as defined by NI 43-101, is responsible for the on-going drilling and sampling program, including quality assurance (QA) and quality control (QC). The core is collected from the drill in sealed core trays and transported to the core logging facility. The core is marked and sampled at 1.5 metre lengths and cut with a diamond blade saw. Samples are bagged with QA/QC samples inserted in batches of 35 samples per lot. Samples are transported in secure bags directly from the Canada Nickel core shack to Actlabs Timmins, an ISO/IEC 17025 accredited lab. Analysis for precious metals (gold, platinum and palladium) are completed by Fire Assay while analysis for nickel, cobalt, sulphur and 17 other elements are performed using a peroxide fusion and ICP-OES analysis. Certified standards and blanks are inserted at a rate of one QA/QC sample per 32 core samples making a batch of 35 samples that are submitted for analysis.
Qualified Person and Data Verification
Stephen J. Balch P.Geo. (ON), VP Exploration of Canada Nickel and a "qualified person" as such term is defined by National Instrument 43-101, has verified the data disclosed in this news release, and has otherwise reviewed and approved the technical information in this news release on behalf of Canada Nickel Company Inc.
About Canada Nickel Company
Canada Nickel Company Inc. is advancing the next generation of nickel-cobalt sulphide projects to deliver nickel and cobalt required to feed the high growth electric vehicle and stainless steel markets. Canada Nickel provides investors with leverage to nickel and cobalt in low political risk jurisdictions. Canada Nickel is currently anchored by its 100% owned flagship Crawford Nickel-Cobalt Sulphide Project in the heart of the prolific Timmins-Cochrane mining camp.
Cautionary Statement Concerning Forward-Looking Statements
This press release contains certain information that may constitute "forward-looking information" under applicable Canadian securities legislation. Forward looking information includes, but is not limited to, drill results relating to the Crawford Nickel-Cobalt Sulphide Project, the potential of the Crawford Nickel-Cobalt Sulphide Project, strategic plans, including future exploration and development results, and corporate and technical objectives. Forward-looking information is necessarily based upon a number of assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking information. Factors that could affect the outcome include, among others: future prices and the supply of metals, the future demand for metals, the results of drilling, inability to raise the money necessary to incur the expenditures required to retain and advance the property, environmental liabilities (known and unknown), general business, economic, competitive, political and social uncertainties, results of exploration programs, risks of the mining industry, delays in obtaining governmental approvals, and failure to obtain regulatory or shareholder approvals. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information. Accordingly, readers should not place undue reliance on forward-looking information. All forward-looking information contained in this press release is given as of the date hereof and is based upon the opinions and estimates of management and information available to management as at the date hereof. Canada Nickel disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by law.
SOURCE Canada Nickel Company Inc.
Contact
Mark Selby, Chair and CEO, Phone: 647-256-1954, email: info@canadanickel.com