Heliostar Metals Drills 8.32 g/t Gold over 5.52 m and 5.13 g/t over 4.42 m to Expand the SH-1 Zone at the Unga Project

Heliostar CEO, Charles Funk, commented, "SH-1 continues to deliver robust widths and high grades as we step out and expand on the historical drilling, particularly in holes SH20-03 and SH20-04. The company is preparing to recommence drilling at Unga in late March to continue infilling and stepping beneath open intersections at the SH-1 zone. Assays also remain pending from the Apollo-Sitka Mine area and the Aquila zone and are expected in later February and early March."

Drilling Highlights

SH20-03

• 6.66 grams per tonne (g/t) gold and 11.7 g/t silver over 6.97 metres (m) from 20.0 m downhole including;
  • 8.32 g/t gold and 12.0 g/t silver over 5.52 m from 21.45 m downhole including;
  • 19.80 g/t gold and 23.3 g/t silver over 2.0 m from 23.0 m downhole

SH20-04

• 5.13 g/t gold and 14.6 g/t silver over 4.42 m from 13.26 m downhole including;
  • 11.5 g/t gold and 20.7 g/t silver over 1.58 m from 13.26 m downhole

Note: All numbers are rounded and widths represent downhole lengths. True thickness is estimated at 80-85% of downhole thickness.

SH-1 Zone

SH-1 is a priority target at Unga. It holds a high-grade, inferred resource containing 384,318 ounces gold at a grade of 13.8 g/t and has significant potential for expansion, with high grade intercepts open along strike and at depth. The resource is centred on the Main Shoot, which is well defined by tightly spaced drilling, but is loosely defined by widely spaced drilling outside of this zone.

A 100-metre vertical gap existed between surface and the first historical vein intercepts and in 2020, seven holes were completed to improve our understanding of the rocks around the upper portions of the Main Shoot. The reported holes are 50 metre step outs on previously completed drilling. Based on previous drilling, it was possible to interpret both steep and shallow plunges to mineralization. Holes SH20-02 and SH20-03 suggest a steeper orientation is more likely and this will guide drilling in 2021.

The company also completed two deeper holes in 2020 to test depth extensions in areas of widely spaced drilling. These holes each intersected a wide vein, but gold mineralization is low-grade. Epithermal veins have natural variability in the distribution of mineralization, and these are the first two of 10-12 that the company plans to drill to systematically infill the loosely defined areas to better constrain the distribution of coarse grained gold.

The deepest completed hole to date at SH-1 intersected 23.99 g/t gold over 5.48 metres in hole BM-01 and the company will continue expand to depth where the system remains open.

Figure 1: Long section of SH-1 looking to northwest with 2020 holes shown and recently received results labelled in red.

To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/7729/74807_b1d31d203459c939_003full.jpg

Drilling along strike from the Main Shoot indicates parallel zones of mineralization that remain open and will be tested when drilling recommences in late March.

SH-1 is one of multiple epithermal gold targets along the 8.4km-long Shumagin vein corridor. It is the most advanced prospect at Unga with a high-grade inferred resource and has considerable potential for expansion.

The SH-1 inferred resource sits at the eastern end of the Shumagin vein corridor, where quartz veining and alteration with associated gold mineralization form an elongate hill. At SH-1, the vein occurs between rhyolite in the hanging wall to the southeast and andesite in the footwall to the northwest. The vein comprises a multi-episodic quartz vein, with a core of competent, brecciated quartz vein that grades outwards through an intense to weak zone of quartz alteration. Gold and lesser silver mineralization is carried within the veins and strongly silicified zones, and is usually found associated with the zinc and lead sulphides, sphalerite and galena.

Figure 2: Plan Map of Unga project with priority targets labelled

To view an enhanced version of Figure 2, please visit:
https://orders.newsfilecorp.com/files/7729/74807_b1d31d203459c939_004full.jpg

Table 1: Table of intersections from the SH-1 Zone. True thickness is estimated at 75-85% of downhole lengths.

Figure 3: Cross section through SH20-03 looking towards the northeast.

To view an enhanced version of Figure 3, please visit:
https://orders.newsfilecorp.com/files/7729/74807_b1d31d203459c939_005full.jpg

Table 2: SH-1 drill hole details. NAD83, Zone 4 Coordinate system.

About Heliostar Metals Ltd.

Heliostar is a well-financed junior exploration and development company with a portfolio of high-grade gold projects in Alaska and Mexico. The company's flagship asset is the 100% controlled Unga Gold Project on Unga and Popof Islands in Alaska. The project hosts an intermediate sulfidation epithermal gold deposit, located within the district-scale property that encompasses 240km² across the two islands. Additional targets on the property include porphyry, high sulphidation and intermediate sulphidation epithermal veins. On Unga Island, priority targets include: the SH-1 and Aquila, both on the Shumagin Trend, the former Apollo-Sitka mine, which was Alaska's first underground gold mine and the Zachary Bay porphyry gold-copper prospect. Gold mineralization at the Centennial Zone is located on neighbouring Popof Island within four kilometres of infrastructure and services at Sand Point.

In Mexico, the company owns 100% of three early stage epithermal projects in Sonora that are highly prospective for gold and silver. Cumaro forms part of the El Picacho district, while the Oso Negro and La Lola projects are also prospective for epithermal gold-silver mineralization.

Quality Assurance / Quality Control

Drill core samples were shipped to ALS Limited in Fairbanks, Alaska for sample preparation and for analysis at the ALS laboratory in North Vancouver. The ALS Fairbanks and North Vancouver facilities are ISO/IEC 17025 certified. Silver and base metals were analyzed using a four-acid digestion with an ICP finish and gold was assayed by 30-gram fire assay with atomic absorption ("AA") spectroscopy finish and overlimits were analyzed by 30g fire assay with gravimetric finish.

Control samples comprising certified reference samples, duplicates and blank samples were systematically inserted into the sample stream and analyzed as part of the Company's quality assurance / quality control protocol.

Qualified Person

The Company's disclosure of technical or scientific information in this press release has been reviewed and approved by Stewart Harris, P.Geo., Exploration Manager for the Company. Mr. Harris is a Qualified Person as defined under the terms of National Instrument 43-101.

For additional information please contact:

Charles Funk

Chief Executive Officer
Heliostar Metals Ltd.
Email: charles.funk@heliostarmetals.com

Rob Grey

Investor Relations Manager
Heliostar Metals Ltd.
Email: rob.grey@heliostarmetals.com

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Information. This release includes certain statements that may be deemed "forward-looking statements". Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words "expects", "plans", "anticipates", "believes", "intends", "estimates", "projects", "potential" and similar expressions, or that events or conditions "would", "may", "could" or "should" occur. Forward-looking statements in this press release include Heliostar's plans to continue aggressive exploration at Unga in 2021 and its goal of defining a resource in excess of one million ounces, its plan to continue infill drilling to expand to depth where the system remains open, and its belief that the SH-1 prospect has considerable potential for expansion. Although Heliostar believes that the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not a guarantee of future performance and actual results may differ materially from those in the forward-looking statements. Factors that could cause the actual results to differ materially from those in forward-looking statements include market prices, exploitation and exploration successes, weather, continued availability of capital and financing, and general economic, market or business conditions. Investors are cautioned that any such statements are not guarantees of future performance and actual results or developments may differ materially from those projected in the forward-looking statements. Forward-looking statements are based on the beliefs, estimates and opinions of the Company's management on the date the statements are made. Except as required by applicable securities laws, the Company undertakes no obligation to update these forward-looking statements in the event that management's beliefs, estimates or opinions, or other factors, should change.