Hudson Resources Inc. Reports Positive Leaching Test Results for the Production of Waste Free Alumina in EU Funded Program

VANCOUVER, Aug. 04, 2021 - Hudson Resources Inc. ("Hudson" or the "Company") (TSX Venture Exchange "HUD"; OTC "HUDRF") is pleased to announce results of independent testwork conducted on anorthosite from the White Mountain mine in Greenland. The testwork, conducted in Norway, confirms that anorthosite from the White Mountain mine gives very high leach recoveries with short leaching times for aluminum and calcium dissolution. This is the key first step in the production of a waste-free smelter grade "Green Alumina" product for the aluminum industry. This work confirms Hudson's earlier work completed at SGS Lakefield and current testwork being undertaken at KPM in Kingston, Ontario (see NR2021-03). Hudson's objective is to demonstrate an economic process to produce a "Green Alumina" product from anorthosite. Hudson has a 31.1% equity interest in the White Mountain anorthosite mine and rights to acquire 100%.

The testwork was conducted by the Institute for Energy Technology (IFE) in Norway as part of its AlSiCal project, and was funded through the European Union's (EU) Horizon 2020 Research and Innovation program under grant No 820911. For more information about IFE please see https://ife.no/en/ and for information on AlSiCal please refer to: https://www.alsical.eu/.

Hudson provided several samples of anorthosite for the testwork including a minus 250 micrometer product and coarse (+100mm) rock samples, crushed and sieved down to 77-760 microns for testing. The IFE determined that the identified samples submitted by Hudson were "of high quality" in the context of the AlSiCal project. Key results are as follows:

• Both the aluminum and calcium are leached simultaneously
• Leaching of between 87-97% wt% (weight percent) in the first two hours
• Leaching of 93-100 wt% in four hours
• Variability within range is attributed to different particle sizes and/or the anorthosites natural heterogeneity

Results were confirmed by ICP-MS analysis and XRF analysis.

Testwork on the two samples demonstrated what IFE considered as "fast leaching" characteristics and a "high total dissolution yield (being 100% the theoretical, calculated maximum dissolution yield based on the available analyses)".

The AlSiCal project objective is to secure for the EU, a sustainable process for the production of alumina, silica and precipitated calcium carbonate by researching, developing and de-risking ground-breaking technology aiming for ZERO Bauxite residue and ZERO CO₂ emissions during their co-production.
Two leaching tests were performed by IFE, which included the following steps:

• Mixing of anorthosite with 20 wt% Hydrochloric acid (HCl) at 140 degrees C
• Cooling of the final reaction mixture
• Separation of liquid and solid fractions by centrifugation and decanting
• Washing of solid fractions and drying

Jim Cambon, President commented: "The EU funded testwork conducted by IFE and AlSiCal independently confirms an efficient and straightforward leaching process of aluminum and calcium from the White Mountain anorthosite. This represents a key step in the production of a waste-free "Green Alumina" product and offers a direct replacement to bauxite which creates almost four tonnes of waste for every tonne of aluminum produced. The time is right for the production of a truly green aluminum in which anorthosite is a key solution."

In addition to its interest in the White Mountain anorthosite operation, Hudson owns 100% of the Sarfartoq rare earth element ("REE") project and the high-grade Nukittooq niobium-tantalum project located on the Sarfartoq exploration license. The Sarfartoq REE project has a 43-101 indicated and inferred resource outlining 35,000 tonnes of neodymium oxide plus praseodymium oxide, the two key components in permanent magnets driving the green revolution. There is significant potential to expand this REE resource, while the Nukittooq project has some of the highest reported niobium assays in the industry (see NR2020-15).

J.R. Goode, P. Eng., is a Qualified Person, as defined by National Instrument 43-101, and reviewed the preparation of the metallurgical and technical information in this press release.

ON BEHALF OF THE BOARD OF DIRECTORS

"Jim Cambon"

President and Director

For further information:
Ph: 604-628-5002

Forward-Looking Statements
CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING INFORMATION: This News Release includes certain "forward-looking statements" which are not comprised of historical facts. Forward looking statements include estimates and statements that describe the Company's future plans, objectives or goals, including words to the effect that the Company or management expects a stated condition or result to occur. Forward-looking statements may be identified by such terms as "believes", "anticipates", "expects", "estimates", "may", "could", "would", "will", or "plan".

Since forward-looking statements are based on assumptions and address future events and conditions, by their very nature they involve inherent risks and uncertainties. Although these statements are based on information currently available to the Company, the Company provides no assurance that actual results will meet management's expectations. Risks, uncertainties and other factors involved with forward-looking information could cause actual events, results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking information. Forward looking information in this news release includes, but is not limited to, the Company's objectives, goals or future plans, statements, exploration results, potential mineralization, the estimation of mineral resources, exploration and mine development plans, timing of the commencement of operations and estimates of market conditions. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to failure to identify mineral resources, failure to convert estimated mineral resources to reserves, the inability to complete a feasibility study which recommends a production decision, the preliminary nature of metallurgical test results, delays in obtaining or failures to obtain required governmental, environmental or other project approvals, political risks, inability to fulfill the duty to accommodate indigenous peoples, uncertainties relating to the availability and costs of financing needed in the future, changes in equity markets, inflation, changes in exchange rates, fluctuations in commodity prices, delays in the development of projects, capital and operating costs varying significantly from estimates and the other risks involved in the mineral exploration and development industry, an inability to complete the Offering on the terms or on the timeline as announced or at all, an inability to predict and counteract the effects of COVID-19 on the business of the Company, including but not limited to the effects of COVID-19 on the price of commodities, capital market conditions, restriction on labour and international travel and supply chains, and those risks set out in the Company's public documents filed on SEDAR. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. The Company disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as required by law.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.