Saville Resources Inc. Intersects 1.00% Nb2O5 over 17.1 m,

Core sample assay highlights at Mallard include:

• 42.3 m of 0.82% Nb₂O₅, 153 ppm Ta₂O₅, and 8.7% P₂O₅ (EC21-175), including,
  • 17.1 m of 1.00% Nb₂O₅, 136 ppm Ta₂O₅, and 8.3% P₂O₅, or
  • 5.1 m of 1.39% Nb₂O₅, 148 ppm Ta₂O₅, and 12.0% P₂O₅,
• 12.4 m of 0.84% Nb₂O₅, 186 ppm Ta₂O₅, and 11.3% P₂O₅ (EC21-176), including,
  • 3.8 m of 1.06% Nb₂O₅, 151 ppm Ta₂O₅, and 12.9% P₂O₅
• 29.7 m of 0.61% Nb₂O₅, 251 ppm Ta₂O₅, and 6.8% P₂O₅ (EC21-177)

The initial three holes of the drill program, completed at the at the Mallard Prospect (EC21-175, 176, and 177), were designed as 50 m step-outs along strike to the southeast of the high-grade intersection in drill hole EC19-174A, which was completed as the final drill hole of the 2019 program, returning 1.36% Nb₂O₅ over 4.5 m, within a larger interval of 0.80% Nb₂O₅ over 31.5 m (see news release dated June 11^th, 2019). The Company is pleased to report that the 2021 drill program has returned the best niobium intercept to date from the Property at 1.00% Nb₂O₅ over 17.1 m, within a larger interval of 0.82% Nb₂O₅ over 42.3 m, including a peak sample assay of 1.73% Nb₂O₅ (Table 1). In addition to the high-grades of niobium, drill intercepts continue to return coincident and significant tantalum and phosphate mineralization.

Mike Hodge, President and CEO of the Company commented: "The Mallard Prospect continues to impress with visible pyrochlore and very-high grades of niobium in drill core, as well as intercepts strengthening with each successive drill program. We feel we have only 'scratched the surface' of the potential Mallard holds, and we are very excited to execute a considerably more expansive drill program once financing is in place"

Table 1: 2021 drill hole results for the Mallard Prospect

All drill holes completed at Mallard were completed at an orientation of 230°/45°, to cross-cut the local geological trend, with depths ranging from 221 to 239 m.

The Mallard Prospect is characterized by a series of sub-parallel, elongate, moderate-steeply dipping, northwest striking mineralized horizons that extend from surface and remain open in all directions. These higher-grade mineralized horizons are surrounded by halos of moderate to low grade niobium mineralization. Coincident and significant grades of tantalum and phosphate are also associated with both moderate and high-grade niobium zones. In addition, well-mineralized fluorite zones were encountered in the 2021 Mallard drill holes, supporting the interpreted extension of the fluorite zone to the southeast (Table 2).

Table 2: 2021 fluorspar drill intercepts at the Mallard Prospect

Given the elongate nature of the mineralization at Mallard, as well as the moderate-steep dip, the mineralized horizons encountered at depth in each hole have a reasonable potential to continue down-dip, as well as up-dip and potentially to surface. Drill hole EC21-175 was collared in mineralization with 0.75% Nb₂O₅ over 9.5 m confirming potential for additional subparallel zones to the northeast, an area of Mallard that remains to be drill tested.

In addition, the high-grade mineralization encountered in the 2021 Mallard drill holes is present within 110 m of surface. Coupled with the presence of numerous high-grade, glacially dispersed boulders, suggests that open-pit extraction methods may be potentially applicable in a development scenario. By comparison, several of the more advanced niobium focused projects in North America are being developed using underground extraction scenarios due to significant amounts of overburden, including North America's only operating niobium mine - Niobec. Overburden thickness at Mallard ranges from 2 to 5 m.

The Company is in the process of updating the geological model at Mallard, which will guide targeting for the next phase of drilling, planned for 2022.

Core sample assays for the four (4) drill holes (668 m) completed at the Miranna Prospect, immediately following the drilling at Mallard, have not yet been received. The drilling at Miranna, marks the first drill testing to date at that prospect.

The Miranna Prospect is characterized by a strongly mineralized (niobium-tantalum-phosphate), glacially dispersed boulder train with an apex that correlates with a distinct magnetic high anomaly. Sample assays of the mineralized boulders from the train include 5.93% Nb₂O₅, 310 ppm Ta₂O₅, and 11.5% P₂O₅; and 4.30% Nb₂O₅, 240 ppm Ta₂O₅, and 13.4% P₂O₅; as well as multiple additional samples grading >1% Nb₂O₅. The drill holes at Miranna are targeting the interpreted bedrock source of this mineralized boulder train. Geological logging of the 2021 Miranna drill core has identified coarse-grained (up to 0.5 cm) pyrochlore mineralization present in each hole, primarily hosted within a magnetite-calcite Carbonatite rock unit.

The Company notes that it carried out its field programs while adhering to all federal, provincial, and regional restrictions in place due to the COVID-19 pandemic. The Company successfully navigated the process to enter Nunavik with authorization obtained to complete its planned field activities. Mineral exploration has been recognized as an essential service in Canada and the Province of Quebec. The Company is also pleased to report that no cases of COVID-19 were documented with respect to the 2021 exploration program.

Quality Assurance / Quality Control (QAQC)

A Quality Assurance / Quality Control protocol following industry best practices was incorporated into the program and included systematic insertion of quartz blanks and certified reference materials into sample batches, as well as collection of quarter-core duplicates, at a rate of approximately 5%. Drill holes were sampled from top to bottom, for a total of 933 samples including QAQC, and were shipped to Activation Laboratories in Ancaster, ON for analysis.

Lab analysis included niobium, tantalum, and major oxides by XRF (package 8-Coltan XRF + Major Oxides) and fluorine by Fusion Specific Ion Electrode-ISE (Code 4F-F). The fluorspar content (CaF₂) is approximated by multiplying the fluorine assay by 2.055 and assumes the fluorspar is the sole source to the fluorine. However, a limited to negligible amount of fluorine may be attributed to fluorapatite, which maybe present with the fluorite in the sample. Therefore, the CaF₂ grade noted is best represented as an approximation of the fluorspar content. Standard drill core sample preparation was completed and comprised of crushing to 80% passing 10 mesh, followed by a 250 g riffle split and pulverizing to 95% passing 105 µ (package RX1). Additional sample analysis is anticipated.

Figure 1: 2021 drill assay highlights - Mallard Prospect

NI 43-101 Disclosure

Darren L. Smith, M.Sc., P.Geo., Dahrouge Geological Consulting Ltd., a Permit holder with the Ordre des Géologues du Québec and Qualified Person as defined by National Instrument 43-101, supervised the preparation of the technical information in this news release.

About Saville Resources Inc.

The Company's principal asset is the Niobium Claim Group Property, situated within the central Labrador Trough, Quebec, and currently under Earn-In Agreement from Commerce Resources Corp. for up to a 75% interest. The Property consists of 26 contiguous mineral claims, encompassing an area of approximately 1,223 hectares, and is considered prospective for niobium, tantalum, phosphate, and fluorspar. The Property includes the Miranna Target, where prior boulder sampling in the area has returned 5.9% Nb₂O₅ and 1,220 ppm Ta₂O₅, as well as the Mallard Prospect where drilling has returned wide intercepts of mineralization, including 1.36% Nb₂O₅ over 4.5 m, within a larger interval of 0.80% Nb2O5 over 31.5 m (EC19-174A).

On Behalf of the Board of Directors

Saville Resources Inc.

"Mike Hodge"

Mike Hodge
President
Tel: 604.681.1568

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Statements

This news release contains forward-looking information which is subject to a variety of risks and uncertainties and other factors that could cause actual events or results to differ from those projected in the forward-looking statements. Forward looking statements in this press release include that we will execute a considerably more expansive drill program; that geological model at Mallard will guide targeting for the next phase of drilling, planned for 2022; and that there is potential for high-grade and wider widths where conditions are favourable. These forward-looking statements are subject to a variety of risks and uncertainties and other factors that could cause actual events or results to differ materially from those projected in the forward-looking information. Risks that could change or prevent these statements from coming to fruition include changing costs for mining and processing; increased capital costs; the potential inability of the Company to finance its plans; the timing and content of upcoming work programs; geological interpretations based on drilling that may change with more detailed information; potential process methods and mineral recoveries assumption based on limited test work and by comparison to what are considered analogous deposits that with further test work may not be comparable; the availability of labour, equipment and markets for the products produced; and despite the current expected viability of the project, conditions changing such that the minerals on our property cannot be economically mined, or that the required permits to build and operate the envisaged mine cannot be obtained. The forward-looking information contained herein is given as of the date hereof and the Company assumes no responsibility to update or revise such information to reflect new events or circumstances, except as required by law.

SOURCE: Saville Resources Inc.