Arizona Sonoran Copper Company Inc. Drilling Extends Mineralization West of the Modelled Cactus Open Pit
The 2021 mineral resource conversion drill program was designed to upgrade the current mineral resources at the Cactus West Open Pit and Cactus East Underground, from inferred to indicated and from indicated to measured resources in advance of current ongoing technical studies. Additionally, the program informs mineral resource growth zones for the 2022 expansion drilling program set to begin shortly. A full set of drill highlights may be found in TABLE 1, below.
Drilling Highlights (please see TABLE 1 for full set of drilling results)
1. Leachable material identified extending 61 m (200 ft) west from the modelled open pit
2. ECW-029 0.774 % Cu TSol over 34 m (113 ft) of enriched mineralization
3. ECW-025 0.272% Cu TSol over 108 m (355 ft) of oxide mineralization
4. ECW-022 0.519% Cu TSol over 40 m (130 ft) of enriched mineralization
5. ECW-023 0.695% Cu TSol over 15.3 m (50.3 ft) of enriched mineralization
George Ogilvie, Arizona Sonoran President and CEO stated, “These drilling results are the first of many exciting developments at the Cactus Project. The drill program is designed to target some materials previously viewed as waste by ASARCO, who at that time were processing sulphide-only material through a floatation mill. With ASCU targeting the leachable materials which sit atop the sulphide mineralization for a heap leach operation, the infill to indicated and measured drilling program may positively affect the starter resource base and ultimately the economics of the pit.
He continued, “The first priority at Cactus is mineral resource conversion as we gear up for the upcoming Prefeasibility Study in 2022 with maiden reserves. Shortly, however we will look to Park/ Salyer for pure exploration drilling in conjunction with Cactus Drilling.”
Geological Description
The Cactus West Orebody extends southwesterly at depth under the western highwall of the pit and beneath the bounding West Fault. Oxide and upper enriched ore zones were intersected to the west of the pit wall in 2020 step out drilling and were further targeted by the current infill program. This portion of the drilling traces the NE-SW trend of the high-grade center of the historic Sacaton West orebody. Results from this portion of the current drilling reinforce the positive results from the previous step out drilling in this area. Core drilling continues northward up the western edge of the pit to complete this successful phase of infill drilling. Condemnation hole, ECW-027, was drilled as a sterilization hole to define the ultimate edge of the western pit for infrastructure planning purposes, located 305 m (1,000 ft) west of the open pit.
TABLE 1: Drilling Highlights
Hole Metres Feet TCu Tsol Mineralization
From To Length From To Length
ECW-022 163.7 166.1 2.4 537.0 545.0 8.0 0.246 0.205 oxide
188.1 191.1 3.0 617.0 627.0 10.0 0.333 0.314 enriched
199.6 203.0 3.4 655.0 666.0 11.0 0.159 0.110 oxide
206.0 226.2 20.1 676.0 742.0 66.0 0.314 0.283 oxide
232.3 238.4 6.1 762.0 782.0 20.0 0.319 0.318 oxide
247.5 250.5 3.0 812.0 822.0 10.0 0.524 0.510 enriched
281.0 284.1 3.0 922.0 932.0 10.0 0.623 0.586 enriched
296.3 299.3 3.0 972.0 982.0 10.0 0.192 0.173 oxide
317.6 357.2 39.6 1042.0 1172.0 130.0 0.552 0.519 enriched
357.2 397.6 40.4 1172.0 1304.6 132.6 0.199 0.020 primary
ECW-023 156.3 158.2 1.9 512.7 519.0 6.3 0.270 0.203 oxide
164.3 170.4 6.1 539.1 559.0 19.9 0.115 0.044 oxide
172.5 175.6 3.1 565.9 576.0 10.1 0.175 0.157 enriched
194.7 210.0 15.3 638.7 689.0 50.3 0.750 0.695 oxide
236.5 239.6 3.0 776.0 786.0 10.0 0.284 0.261 oxide
263.9 294.4 30.6 865.7 966.0 100.3 0.397 0.356 oxide
incl. 270.1 282.2 12.2 886.0 926.0 40.0 0.524 0.489
294.4 305.3 10.8 966.0 1001.5 35.5 0.461 0.377 enriched
305.3 425.5 120.2 1001.5 1396.0 394.5 0.385 0.032 primary
incl. 361.5 395.3 33.8 1186.0 1297.0 111.0 0.580 0.038
ECW-024 149.8 206.3 56.5 491.6 677.0 185.4 0.247 0.195 oxide
206.3 218.5 12.2 677.0 717.0 40.0 0.668 0.607 enriched
227.7 230.7 3.0 747.0 757.0 10.0 1.275 1.178 enriched
236.8 252.1 15.2 777.0 827.0 50.0 0.247 0.199 oxide
252.1 266.7 14.6 827.0 875.0 48.0 0.398 0.363 enriched
ECW-025 176.2 179.7 3.6 578.0 589.7 11.7 0.350 0.311 oxide
180.2 182.9 2.7 591.1 600.0 8.9 0.114 0.079 oxide
189.0 297.2 108.2 620.0 975.0 355.0 0.319 0.272 oxide
297.2 319.8 22.6 975.0 1049.3 74.3 0.238 0.042 primary
ECW-026 145.0 164.3 19.3 475.8 539.0 63.2 0.262 0.226 oxide
164.3 170.1 5.8 539.0 558.0 19.0 0.653 0.616 enriched
170.1 200.6 30.5 558.0 658.0 100.0 0.239 0.195 oxide
203.6 252.4 48.8 668.0 828.0 160.0 0.419 0.271 enriched
incl. 205.3 212.8 7.5 673.4 698.0 24.6 1.136 1.011
252.4 287.7 35.4 828.0 944.0 116.0 0.422 0.041 primary
ECW-027 306.9 310.6 3.7 1007.0 1019.0 12.0 0.431 0.371 oxide
316.1 331.3 15.2 1037.0 1087.0 50.0 0.224 0.193 oxide
353.6 354.6 1.1 1160.0 1163.5 3.5 0.952 0.937 enriched
360.6 368.5 7.9 1183.0 1209.0 26.0 0.255 0.251 enriched
377.3 404.5 27.1 1238.0 1327.0 89.0 0.303 0.296 enriched
404.5 469.4 64.9 1327.0 1540.0 213.0 0.134 0.031 primary
ECW-028 199.9 208.5 8.5 656.0 684.0 28.0 0.293 0.254 oxide
223.4 226.2 2.7 733.0 742.0 9.0 0.101 0.048 oxide
231.0 246.3 15.2 758.0 808.0 50.0 0.161 0.138 oxide
276.8 279.8 3.0 908.0 918.0 10.0 0.174 0.150 enriched
325.5 331.6 6.1 1068.0 1088.0 20.0 0.884 0.704 enriched
356.8 359.7 2.9 1170.5 1180.0 9.5 0.180 0.121 enriched
359.7 396.2 36.6 1180.0 1300.0 120.0 0.181 0.025 primary
ECW-029 141.4 184.9 43.4 464.0 606.5 142.5 0.308 0.266 oxide
184.9 219.2 34.3 606.5 719.0 112.5 0.815 0.774 enriched
incl. 184.9 200.1 15.2 606.5 656.5 50.0 1.207 1.175
219.2 240.5 21.3 719.0 789.0 70.0 0.464 0.412 oxide
240.5 283.2 42.7 789.0 929.0 140.0 0.503 0.409 enriched
283.2 333.5 50.3 929.0 1094.0 165.0 0.246 0.029 primary
1. Intervals are presented in core length; are drilled with dip angles between 55 degrees and 75 degrees to target zones for expansion of mineralization.
2. Drill assays assume a mineralized cut-off grade of 0.1% CuT reflecting the potential for heap leaching in the case of Oxide and Enriched material, or to provide typical average grades in the case of Primary material. Most holes were terminated in Primary mineralization.
3. Assay results are not capped. Intercepts are aggregated within geological confines of major mineral zones.
Table 2: Drill details
Hole Easting Northing Elevation Depth Azimuth Dip
ECW-022 388487 63755.44 1442.515 1304.6 90 -45
ECW-023 388549.7 63522.79 1440.507 1396 85 -55
ECW-024 388655.8 63299.22 1440.143 1011 80 -50
ECW-025 388422.3 63084.55 1435.619 1049.3 70 -60
ECW-026 388733.6 63020.49 1436.774 944 70 -55
ECW-027 387759.6 63329.03 1434.005 1540 90 -60
ECW-028 388349.6 63761.94 1441.334 1300 94 -55
ECW-029 388731.2 63020.03 1436.823 1094 70 -80
Quality Assurance / Quality Control
Drilling completed on the project in 2020 was supervised by on-site ASCU personnel who prepared core samples for assay and implemented a full QA/QC program using blanks, standards and duplicates to monitor analytical accuracy and precision. The samples were sealed on site and shipped to Skyline Laboratories in Tucson AZ for analysis. Skyline’s quality control system complies with global certifications for Quality ISO9001:2008.
Technical aspects of this news release have been reviewed and verified by Allan Schappert – CPG, who is a qualified person as defined by National Instrument 43-101– Standards of Disclosure for Mineral Projects.
Links from the Press Release
FIGURES 1-3: https://arizonasonoran.com/projects/cactus-mine-project/press-release-images/
Neither the TSX nor the regulating authority has approved or disproved the information contained in this press release.
About Arizona Sonoran Copper Company (www.arizonasonoran.com | www.cactusmine.com)
ASCU’s objective is to become a mid-tier copper producer with low operating costs, develop the Cactus Project that could generate robust returns for investors, and provide a long term sustainable and responsible operation for the community and all stakeholders. The Company's principal asset is a 100% interest in the Cactus Project (former ASARCO, Sacaton mine) which is situated on private land in an infrastructure-rich area of Arizona. The Company is led by an executive management team and Board which have a long-standing track record of successful project delivery in North America complemented by global capital markets expertise.
Forward-Looking Statements
Forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of ASCU to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. Factors that could affect the outcome include, among others: future prices and the supply of metals; the results of drilling; inability to raise the money necessary to incur the expenditures required to retain and advance the properties; environmental liabilities (known and unknown); general business, economic, competitive, political and social uncertainties; results of exploration programs; accidents, labour disputes and other risks of the mining industry; political instability, terrorism, insurrection or war; or delays in obtaining governmental approvals, projected cash operating costs, failure to obtain regulatory or shareholder approvals.
Although ASCU has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking statements, there may be other factors that cause actions, events or results to differ from those anticipated, estimated or intended. Forward-looking statements contained herein are made as of the date of this news release and ASCU disclaims any obligation to update any forward-looking statements, whether as a result of new information, future events or results or otherwise, except as required by applicable securities laws.
Contacts
Arizona Sonoran Copper Company Inc.
Alison Dwoskin, Director, Investor Relations
647-233-4348
adwoskin@arizonasonoran.com
George Ogilvie, President, CEO and Director
416-723-0458
gogilvie@arizonasonoran.com