Tower Resources's First Two Follow-Up Drill Holes on Lightning Zone Return Long Intervals Surpassing Gold Grade of Discovery Hole

The two new holes, RN22-028 and 029, were drilled on a section 50 m northeast of Discovery Hole 026 (see Fig. 2) which intersected 1.40 g/t Au over 95 m, including 4.21 g/t Au over 19.2 m (see Tower's January 11, 2022 press release). They were drilled toward one another in scissors fashion, at right angles to the inferred northeasterly (040°) strike of the shear-hosted Lightning Zone, with the objective of determining its dip. Hole 028 was drilled to the southeast (130°) while Hole 029 was drilled to the northwest (310°). Both holes passed completely through the zone, thereby establishing not only its dip, which is essentially vertical (see Fig. 3), but also its true thickness which is a remarkable 40 metres.

Hole 028:

Hole 028 was drilled very steeply at -80° and thus cut the gold zone obliquely, increasing the length of the mineralized interval. It averaged 1.55 g/t Au over 138.0 m, including 4.76 g/t Au over 24.5 m, with both grades being a little higher than those of the comparable intervals in the discovery hole. The gold grade is remarkably uniform with only one high assay (43.6 g/t) over 1 ounce per ton (34.37 g/t) from 119 consecutive samples across the zone. The hole exited the southeast side of the gold zone at a vertical depth of 174 m, demonstrating that the zone continues uninterrupted to depth.

Hole 029:

Hole 029 was drilled at a more moderate dip of -60° and thus crossed the gold zone more squarely. The Au grade again increased slightly, averaging 1.78 g/t over 70.5 m, including 4.92 g/t over 13.5 m. A satellite zone ~10 m northwest of the main zone averaged 0.93 g/t over 16.0 m.

Stu Averill, a seasoned geologist and Director of the Company, commented: "It's unusual to hit such extensive mineralization with the first drill holes in a shear-hosted deposit but what really stands out is the consistency of the gold grade. We angled the holes through the zone in completely different directions yet got essentially the same results, even in the higher-grade subzone."

Joe Dhami, Tower's President, added: "Our gold discovery has many positive features but the most important is its location between two active mines in the great Kamloops Mining District. There is probably no other area in B.C. with better access, more mining infrastructure and lower development costs."

Hole 026 Pierce Point:

Hole 026, the discovery hole, was drilled obliquely to the northeast-striking gold zone (see Fig. 2) rather than squarely across the zone like Holes 028 and 029. While drilled months before these holes, it was of sufficient length that it passed between them.

The point where Hole 026 pierces the Holes 028/029 cross section (see Fig. 3) is ~109 m down the hole at a vertical depth of ~95 m. The 95-m-long mineralized intercept of the Lightning Zone occurs between 51 and 146 m down-hole and thus straddles the cross-section. The higher-grade (4.2 g/t Au), 19.2 m subzone is between 113.2 and 134.0 m down-hole and thus is a little behind (northeast of) the cross-section, implying that this subzone plunges steeply toward Hole 30.

Lower Grade Gold Envelope and Satellite Gold Zones:

Most of the volcaniclastic rocks in the ten holes that have now been drilled near the Lightning Zone are significantly anomalous in gold, assaying at least 50 to 100 ppb. The Lightning Zone itself is enveloped by 10 to 15 m of low-grade mineralization averaging about 0.3 to 0.5 g/t Au. As the cut-off grade in open pit gold mines is typically 0.3 g/t, this low-grade envelope may in future be considered part of the zone.

Hole 029 reached a depth of 374 m and thus extended far beyond the Lightning Zone, crossing the corridor to the northwest where Hole 027, which was drilled in late 2021 from the same pad as Discovery Hole 026, intersected two lower-grade "footwall" zones (since the Lightning Zone is now known to be subvertical, it does not have a definite footwall and the outlying gold zones to the northwest are now referred to as satellite zones).

Hole 029 intersected eight gold zones within the satellite corridor. These zones vary in down-hole width from 4 to 33 m and together aggregate 101 m, representing 52% of the 193-m-wide corridor. Five have low Au grades between 0.34 and 0.52 g/t and the other three have higher grades between 0.83 and 1.13 g/t. While presently of limited interest, most of these zones would probably be treated as ore rather than waste if the Lightning Zone were developed as an open pit mine.

Next Steps:

The Au assays from the four remaining holes are being received in several batches and will require a thorough review prior to their release. Two separate releases may be required.

Methods and Qualified Person

The drill core was logged at Tower's leased, fully equipped core facility near Kamloops under the supervision of Matthew Husslage, BSc. Geology, and Dane Bridge, MSc., P.Geo., both of whom have extensive experience with shear-hosted gold deposits and have previously worked on the Rabbit North property.

Split samples of the core, generally 1-2 m in length, were delivered directly to Activation Laboratories (ActLabs) in Kamloops, BC, a laboratory certified as ISO/IEC 17025 Accredited (Lab 790) by the Standards Council of Canada. QA/QC samples including blanks and standards were inserted regularly into the sample sequence at a ratio of approximately 1:20.

The samples were analyzed for Au by fire assay and ICP-OES and for Ag and 36 additional elements by ICP-OES using a four-acid, near-total digestion. Any over-limit (>5 g/t) Au analyses were repeated using the same fire assay procedure but with a gravimetric rather than ICP finish.

The technical content of this news release has been reviewed and approved by Stuart Averill, P.Geo., a Director of the Company, and a Qualified Person as defined by National Instrument 43-101.

About Tower Resources

Tower is a Canadian based mineral exploration company focused on the discovery and advancement of economic mineral projects in the Americas. The Company's key exploration assets, both in B.C., are the Rabbit North copper-gold porphyry project located between the New Afton copper-gold and Highland Valley copper mines in the Kamloops mining district and the Nechako gold-silver project near Artemis' Blackwater project.

On behalf of the Board of Directors
Tower Resources Ltd.

Joe Dhami, President and CEO
(778) 996-4730
www.towerresources.ca

Reader Advisory

This news release may contain statements which constitute "forward-looking information", including statements regarding the plans, intentions, beliefs and current expectations of the Company, its directors, or its officers with respect to the future business activities of the Company. The words "may", "would", "could", "will", "intend", "plan", "anticipate", "believe", "estimate", "expect" and similar expressions, as they relate to the Company, or its management, are intended to identify such forward-looking statements. Investors are cautioned that any such forward-looking statements are not guarantees of future business activities and involve risks and uncertainties, and that the Company's future business activities may differ materially from those in the forward-looking statements as a result of various factors, including, but not limited to, fluctuations in market prices, successes of the operations of the Company, continued availability of capital and financing and general economic, market or business conditions. There can be no assurances that such information will prove accurate and, therefore, readers are advised to rely on their own evaluation of such uncertainties. The Company does not assume any obligation to update any forward-looking information except as required under the applicable securities laws.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Figure 1 - Location of Tower's Rabbit North property relative to the active mines of the Kamloops district.

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/5023/128546_e941aad574d3e991_002full.jpg

Figure 2 - Locations of the initial 2021 exploration Holes RN21-24 to 27 (red) and recent 2022 delineation holes RN22-28 to 33 (green).

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/5023/128546_e941aad574d3e991_003full.jpg

Figure 3 - NW-SE section through Holes 028 and 029 looking northeast.

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/5023/128546_e941aad574d3e991_004full.jpg