O3 Mining Intersects 1.5 g/t Au over 44.3 Metres at Kierens-Norlartic Infill Program, Marban Engineering
"Not only do the results offer us the potential to expand the Kierens-Norlartic resources, but we are also seeing consistency with the estimated grades, giving us confidence that we can convert more material not considered in the PFS to ore, which will be reflected in the Feasibility Study in Q1 2024. We expect to receive more assay results from our drilling campaign in the next weeks and it promises to continue unveiling Marban's resource potential while we continue drilling with three rigs at our Marban project," said O3 Mining President and Chief Executive Officer, Mr. Jose Vizquerra.
- 1.5 g/t Au over 44.3 metres in hole O3MA-22-356 starting at 257.4 meters in the hole in the Norlartic PFS pit shell.
- 1.6 g/t Au over 27.0 metres in hole O3MA-22-385 starting at 356.4 meters in the hole at the bottom of the Norlartic PFS pit shell.
- 2.1 g/t Au over 84.5 metres (true width of approx. 19 metres) in hole O3MA-22-335 starting at 17.6 meters in the hole near surface and at the eastern limit of the Norlartic PFS pit shell.
Most of the results published today are consistent with the estimated grades of the inferred blocks they were aiming to convert. Some of the intercepts are located immediately outside of the PFS pit outline thus offering the possibility to increase the tonnage of the resource if a future pit expansion can be demonstrated. In the case of the Norlartic deposit, it is interesting noting that drill hole O3MA-22-335 returned a notable intercept right next to the property boundary in the south-east corner of the pit shell, where it remains open. The process of updating the ore wireframes is ongoing and will be completed as soon as the full assay results are received. We will then be working with our consultants to update the resource estimate that we expect will form part of the Feasibility Study.
Figure 1 - Marban Engineering Property Map
Figure 2 - Norlartic Infill Drilling Intercepts
The 2022 infill program comprises 64 drill holes totaling 12,153 metres. The parameters are listed in Table 2 for the entire program. Many significant intercepts have been published in the last months (Press Release - July 6, 2022, and December 22, 2022). Those drill holes also contain a significant amount of intercepts with grade-thickness values between 5 and 20 m*g/t Au.
Table 1: Conversion Drill Hole Intercepts (only intercepts above 20.0 g/t Au*m are reported, cut-off 0.3 g/t Au and within or near resources pit shells)
Hole | From (m) | To (m) | Grade | Core | Zone |
O3MA-21-229+O3MA-22-229EXT* | 47.5 | 104.2 | 2.0 | 56.7 | Norlartic |
O3MA-22-229EXT* | 120.0 | 144.1 | 1.8 | 24.1 | |
O3MA-22-356 | 257.4 | 301.7 | 1.5 | 44.3 | |
O3MA-22-335* | 17.6 | 102.1 | 2.1 | 84.5 | |
O3MA-22-354 | 229.5 | 246.8 | 1.6 | 17.3 | |
O3MA-22-374* | 20.2 | 50.7 | 2.9 | 30.5 | |
O3MA-22-375 | 18.5 | 25.0 | 3.0 | 6.5 | |
O3MA-22-385 | 356.4 | 383.4 | 1.6 | 27.0 | |
O3MA-22-411 | 267.5 | 282.5 | 1.6 | 15.0 | |
O3MA-22-435 | 300.1 | 310.5 | 2.0 | 10.4 | |
O3MA-22-436 | 66.5 | 76.2 | 2.3 | 9.7 | |
O3MA-22-325* | 37.0 | 57.3 | 2.0 | 20.3 | Kierens |
O3MA-22-337 | 29.5 | 58.5 | 0.9 | 29.0 | North |
O3MA-22-336 | 99.3 | 100.3 | 21.4 | 1.0 | North-North |
O3MA-22-399 | 33.0 | 52.1 | 1.9 | 19.1 |
* True width determination is estimated at 75-95% of the reported core length interval. Holes marked with an asterisk were drilled at a lower angle to the zones and true width varies from 18-35% of the reported core length.
Table 2: Technical parameters of the hole of the 2022 Infill drilling program
Hole | Azimuth (°) | Dip (°) | Start | End Depth | Length | UTM | UTM |
O3MA-22-229EXT | 34 | -46 | 101 | 240 | 139 | 277801 | 5337019 |
O3MA-22-278 | 208 | -54 | 0 | 171 | 171 | 277660 | 5337803 |
O3MA-22-279 | 208 | -59 | 0 | 156 | 156 | 277683 | 5337776 |
O3MA-22-280 | 208 | -55 | 0 | 141 | 141 | 277658 | 5337759 |
O3MA-22-281 | 211 | -45 | 0 | 192 | 192 | 277906 | 5337313 |
O3MA-22-282 | 212 | -45 | 0 | 132 | 132 | 277883 | 5337323 |
O3MA-22-283 | 212 | -79 | 0 | 180 | 180 | 277883 | 5337323 |
O3MA-22-284 | 211 | -60 | 0 | 129 | 129 | 277833 | 5337299 |
O3MA-22-285 | 211 | -59 | 0 | 228 | 228 | 277947 | 5337367 |
O3MA-22-286 | 209 | -45 | 0 | 150 | 150 | 277838 | 5337390 |
O3MA-22-287 | 211 | -65 | 0 | 188 | 188 | 277838 | 5337390 |
O3MA-22-288 | 211 | -59 | 0 | 225 | 225 | 277811 | 5337444 |
O3MA-22-289 | 211 | -56 | 0 | 204 | 204 | 277840 | 5337438 |
O3MA-22-290 | 208 | -45 | 0 | 165 | 165 | 277220 | 5337947 |
O3MA-22-291 | 208 | -45 | 0 | 162 | 162 | 277241 | 5337917 |
O3MA-22-292 | 178 | -45 | 0 | 132 | 132 | 277241 | 5337917 |
O3MA-22-293 | 158 | -45 | 0 | 171 | 171 | 277851 | 5337832 |
O3MA-22-294 | 158 | -45 | 0 | 171 | 171 | 277813 | 5337820 |
O3MA-22-295 | 155 | -45 | 0 | 174 | 174 | 277741 | 5337795 |
O3MA-22-323 | 30 | -45 | 0 | 150 | 150 | 276822 | 5337620 |
O3MA-22-325 | 31 | -45 | 0 | 150 | 150 | 276789 | 5337646 |
O3MA-22-326 | 20 | -45 | 0 | 177 | 177 | 276773 | 5337658 |
O3MA-22-328 | 220 | -45 | 0 | 123 | 123 | 276791 | 5337766 |
O3MA-22-329 | 31 | -42 | 0 | 102 | 102 | 277160 | 5337395 |
O3MA-22-331 | 207 | -54 | 0 | 264 | 264 | 277387 | 5337234 |
O3MA-22-332 | 209 | -49 | 0 | 102 | 102 | 277692 | 5337042 |
O3MA-22-335 | 68 | -45 | 0 | 126 | 126 | 277831 | 5336900 |
O3MA-22-336 | 211 | -60 | 0 | 171 | 171 | 277604 | 5337835 |
O3MA-22-337 | 208 | -46 | 0 | 84 | 84 | 277617 | 5337429 |
O3MA-22-339 | 209 | -45 | 0 | 111 | 111 | 277655 | 5337414 |
O3MA-22-342 | 211 | -47 | 0 | 93 | 93 | 277754 | 5337345 |
O3MA-22-343 | 212 | -45 | 0 | 102 | 102 | 277819 | 5337342 |
O3MA-22-345 | 212 | -45 | 0 | 114 | 114 | 277850 | 5337344 |
O3MA-22-347A | 205 | -46 | 0 | 389 | 389 | 277711 | 5337436 |
O3MA-22-354 | 209 | -45 | 332 | 332 | 277708 | 5337347 | |
O3MA-22-356 | 209 | -48 | 0 | 354 | 354 | 277725 | 5337372 |
O3MA-22-359C | 214 | -48 | 0 | 298 | 298 | 277692 | 5337397 |
O3MA-22-363 | 209 | -55 | 0 | 365 | 365 | 277637 | 5337466 |
O3MA-22-368 | 209 | -46 | 0 | 429 | 429 | 277708 | 5337502 |
O3MA-22-374 | 32 | -54 | 0 | 88 | 88 | 277606 | 5337056 |
O3MA-22-375 | 168 | -45 | 0 | 81 | 81 | 277544 | 5337130 |
O3MA-22-376A | 44 | -45 | 0 | 84 | 84 | 277702 | 5336993 |
O3MA-22-380 | 208 | -52 | 0 | 417 | 417 | 277620 | 5337520 |
O3MA-22-385 | 208 | -46 | 0 | 441 | 441 | 277736 | 5337478 |
O3MA-22-390A | 211 | -46 | 0 | 189 | 189 | 277797 | 5337480 |
O3MA-22-396 | 212 | -59 | 0 | 90 | 90 | 277309 | 5337827 |
O3MA-22-399 | 228 | -45 | 0 | 126 | 126 | 277305 | 5337853 |
O3MA-22-401 | 198 | -50 | 0 | 93 | 93 | 277258 | 5337879 |
O3MA-22-402 | 204 | -54 | 0 | 159 | 159 | 277286 | 5337952 |
O3MA-22-407 | 215 | -60 | 0 | 113 | 113 | 277507 | 5337547 |
O3MA-22-411 | 212 | -50 | 0 | 338 | 338 | 277488 | 5337515 |
O3MA-22-415 | 212 | -57 | 0 | 356 | 356 | 277488 | 5337515 |
O3MA-22-422 | 213 | -68 | 0 | 312 | 312 | 277505 | 5337410 |
O3MA-22-428 | 200 | -63 | 0 | 239 | 239 | 277633 | 5337202 |
O3MA-22-430 | 10 | -65 | 0 | 200 | 200 | 277664 | 5337294 |
O3MA-22-433 | 170 | -78 | 0 | 230 | 230 | 277728 | 5337147 |
O3MA-22-435 | 204 | -64 | 0 | 323 | 323 | 277518 | 5337488 |
O3MA-22-436 | 218 | -45 | 0 | 149 | 149 | 277460 | 5337278 |
O3MA-22-438 | 33 | -85 | 0 | 208 | 208 | 277516 | 5337554 |
O3MA-22-439 | 198 | -68 | 0 | 131 | 131 | 277467 | 5337588 |
O3MA-22-440 | 206 | -68 | 0 | 185 | 185 | 277463 | 5337627 |
O3MA-22-445 | 178 | -88 | 0 | 102 | 102 | 277387 | 5337234 |
O3MA-22-446 | 338 | -42 | 0 | 126 | 126 | 276773 | 5337658 |
O3MA-22-447 | 150 | -42 | 0 | 132 | 132 | 276723 | 5337765 |
The scientific and technical content of this news release has been reviewed, prepared and approved by Mr. Sébastien Vigneau (OGQ #993), Principal Geologist, who is a "qualified person" as defined by National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101").
For further information on the Marban project, please see the technical report, entitled "NI 43-101 Pre-feasibility Study of the Marban Engineering Project" and dated October 7, 2022 (with an effective date of September 6, 2022), (the "Marban PFS"). Reference should be made to the full text of the Marban PFS for the assumptions, qualifications and limitations relating to the PFS. The Marban PFS is available on SEDAR (www.sedar.com) under O3 Mining's issuer profile.
Mineral resources that are not mineral reserves do not have demonstrated economic viability.
Assays are uncut except where indicated. Intercepts occur within geological confines of major zones but have not been correlated to individual vein domains at this time. Half-core samples are shipped to Agat laboratory in Val-d'Or, Québec, and Mississauga, Ontario for assaying. The core is crushed to 75% passing -2 mm (10 mesh), a 250 g split of this material is pulverized to 85% passing 75 microns (200 mesh) and 50 g is analyzed by Fire Assay (FA) with an Atomic Absorption Spectrometry (AAS) finish. Samples assaying >10.0 g/t Au are re-analyzed with a gravimetric finish using a 50 g charge.
Commercial certified standard material and blanks are systematically inserted by O3 Mining's geologists into the sample chain after every 18 core samples as part of the quality assurance and quality control ("QA/QC") program. Third-party assays are submitted to other designated laboratories for 5% of mineralized samples. Drill program design, QA/QC, and interpretation of results are performed by qualified persons employing a QA/QC program consistent with NI 43-101 and industry best practices.
O3 Mining Inc., an Osisko Group company, is a gold explorer and mine developer on the road to produce from its highly prospective gold camps in Québec, Canada. O3 Mining benefits from the support, previous mine-building success and expertise of the Osisko team as it grows towards being a gold producer with several multi-million-ounce deposits in Québec.
O3 Mining is well-capitalized and owns a 100% interest in all its properties (66,000 hectares) in Québec. O3 Mining trades on the TSX Venture Exchange (TSXV: OIII) and OTC Markets (OTCQX: OIIIF). The Corporation is focused on delivering superior returns to its shareholders and long-term benefits to its stakeholders. Further information can be found on our website at https://o3mining.com
This news release contains "forward-looking information" within the meaning of the applicable Canadian securities legislation that is based on expectations, estimates, projections, and interpretations as at the date of this news release. Forward-looking statements including, but are not limited to, statements with respect to planned and ongoing drilling, the significance of drill results, the ability to continue drilling, the impact of drilling on the definition of any resource, the ability to incorporate new drilling in an updated technical report and resource model. Any statement that involves discussions with respect to predictions, expectations, interpretations, beliefs, plans, projections, objectives, assumptions, future events or performance (often but not always using phrases such as "expects", or "does not expect", "is expected", "interpreted", "management's view", "anticipates" or "does not anticipate", "plans", "budget", "scheduled", "forecasts", "estimates", "believes" or "intends" or variations of such words and phrases or stating that certain actions, events or results "may" or "could", "would", "might" or "will" be taken to occur or be achieved) are not statements of historical fact and may be forward-looking information and are intended to identify forward-looking information. Except for statements of historical fact relating to the Corporation, certain information contained herein constitutes forward-looking statements Forward-looking information is based on estimates of management of the Corporation, at the time it was made, involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the companies to be materially different from any future results, performance or achievements expressed or implied by such forward-looking information. Such factors include, among others, risks relating to the drill results at Malartic H; the significance of drill results; the ability of drill results to accurately predict mineralization; the ability of the Corporation to produce an updated mineral resource estimate on Malartic in Q2 2023 (or at all); the ability of any material to be mined in a matter that is economic. Although the forward-looking information contained in this news release is based upon what management believes, or believed at the time, to be reasonable assumptions, the parties cannot assure shareholders and prospective purchasers of securities that actual results will be consistent with such forward-looking information, as there may be other factors that cause results not to be as anticipated, estimated or intended, and neither the Corporation nor any other person assumes responsibility for the accuracy and completeness of any such forward-looking information. The Corporation believes that this forward-looking information is based on reasonable assumptions, but no assurance can be given that these expectations will prove to be correct and such forward-looking statements included in this press release should not be unduly relied upon. The Corporation does not undertake, and assumes no obligation, to update or revise any such forward-looking statements or forward-looking information contained herein to reflect new events or circumstances, except as may be required by law. These statements speak only as of the date of this news release.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein.
SOURCE O3 Mining Inc.
Contact
on O3 Mining, please contact: José Vizquerra Benavides, President, CEO and Director, Toll-Free: +1 (833) 979-3516, Telephone: +1 (873) 381-2014