• Sonntag, 22 Dezember 2024
  • 11:41 Uhr Frankfurt
  • 10:41 Uhr London
  • 05:41 Uhr New York
  • 05:41 Uhr Toronto
  • 02:41 Uhr Vancouver
  • 21:41 Uhr Sydney

Lion One Updates Drill Results at Tuvatu

15.08.2023  |  Newsfile

High grade composite results increased in Zone 5 drilling

North Vancouver, August 15, 2023 - Lion One Metals Ltd. (TSXV: LIO) (OTCQX: LOMLF) (ASX: LLO) ("Lion One" or the "Company") is issuing an update on composite drill results reported in the Company's August 10, 2023 news release.

The August 10, 2023 news release reported infill and grade control drill results from Zone 5 of the Company's Tuvatu alkaline gold project in Fiji. Several composite gold grades reported in that news release are here updated.

Gold analysis at Tuvatu is conducted using fire assay with an atomic absorption (AA) finish. Samples that return grades over 10 g/t Au are then re-analyzed by gravimetric method. The gravimetric method is considered more accurate than fire assay for high-grade samples. Lion One has therefore recently adopted a new protocol whereby gravimetric results are reported for samples that return over 10 g/t Au. In the August 10, 2023 news release, composite intervals were calculated using fire assay values rather than gravimetric values, whereas high-grade individual assays were quoted using the more accurate gravimetric results. This led to a discrepancy between the composite values and the underlying assay values for certain intervals. The difference between fire assay and gravimetric analyses tends to be greater for higher grade samples. A total of 21 composite values have been updated and are presented in Table 1 below. The majority of the updated results are greater than was initially reported.

Table 1. Updated composite intervals from Zone 5 infill and grade control drilling. Bolded text represents a positive change, italicized text represents a negative change. Intervals are ordered by decreasing gold content.

Hole ID From To Interval (m) Updated Au (g/t) Original Au (g/t) Change (g/t)
TGC-0067 48.2 50 1.8 314.27 261.93 52.34
TUDDH-643 242.7 249.3 6.6 83.47 80.78 2.69
TGC-0067 53.3 54.2 0.9 104.00 93.05 10.95
TUDDH-643 111.6 114.9 3.3 18.40 17.48 0.92
TUDDH-643 161.7 163.2 1.5 16.13 15.96 0.17
TUDDH-638 254.7 257 2.3 10.25 9.41 0.84
TUDDH-643 101.9 103.1 1.2 13.50 13.13 0.37
TUDDH-643 123.4 124 0.6 25.19 25.95 -0.76
TGC-0061 219.2 220.4 1.2 10.31 8.32 1.99
TUDDH-637 45.3 45.6 0.3 35.98 36.2 -0.22
TUDDH-643 52.2 52.5 0.3 31.87 33.51 -1.64
TUDDH-644 55.8 58.2 2.4 3.43 3.4 0.03
TGC-0065 53.1 55.2 2.1 3.91 3.82 0.09
TUDDH-634 49.2 50.7 1.5 5.44 5.68 -0.24
TUDDH-637 216.4 217 0.6 11.63 10.99 0.64
TGC-0065 128.5 129.4 0.9 7.42 6.8 0.62
TGC-0065 57.4 58.3 0.9 7.01 6.88 0.13
TUDDH-634 154.9 155.2 0.3 14.96 15.17 -0.21
TUDDH-656 173.6 173.9 0.3 11.66 10.14 1.52
TGC-0059 220.3 220.6 0.3 10.87 12.85 -1.98
TGC-0058 133.4 133.7 0.3 10.86 10.37 0.49

Tables 2 and 3 below are reproductions of Tables 1 and 2 from the August 10, 2023 news release updated to include composite intervals calculated using assay results from the gravimetric method. Composite values that have been changed are highlighted with bolded text representing positive changes and italicized text representing negative changes. Values with no bolding or italicization represent intervals for which there is no change.

Table 2. Highlights of composited infill drill results in the Zone 5 area. Reproduction of Table 1 from the August 10, 2023 news release, with updated composite grades. For full results see Table 4 in the appendix.

Hole ID
From To Interval (m) Au (g/t) Change (g/t)
TUDDH-634
123.4 124 0.6 25.19 -0.76
TUDDH-637
161.7 163.2 1.5 16.13 0.17

including 161.7 162.3 0.6 38.62 -

which includes 161.7 162 0.3 72.46 -
TUDDH-637
198.2 202.1 3.9 5.38 -

including 198.2 198.5 0.3 10.02 -

and 199.7 200.6 0.9 3.42 -

and 201.2 202.1 0.9 16.13 -

which includes 201.8 202.1 0.3 40.21 -
TUDDH-643
111.6 114.9 3.3 18.4 0.92

including 111.6 113.7 2.1 28.44 -

which includes 113.1 113.7 0.6 95.63 -
TUDDH-643
242.7 249.3 6.6 83.47 2.69

including 242.7 246.3 3.6 17.39 -

which includes 243.9 245.7 1.8 55.49 -

which includes 243.9 244.5 0.6 79.84 -

and 245.1 245.7 0.6 14.89 -

and also including 247.5 249.3 1.8 271.14 -

which includes 247.5 247.8 0.3 40.03 -

and 248.7 249.6 0.6 793.24 -
TUDDH-643
254.7 257 2.3 10.25 0.84

including 254.7 255.3 0.6 35.54 -
TUDDH-650
192.6 194.1 1.5 14.93 -

including 192.6 193.5 0.9 23.89 -
TUDDH-650
203.5 207.4 3.9 11.84 -

including 203.5 204.7 1.2 35.18 -

which includes 203.5 204.1 0.6 48.27 -

and 204.1 204.7 0.6 22.09 -
TUDDH-651
184.6 185.2 0.6 32.65 -
TUDDH-651
194.5 197.2 2.7 17.2 -

including 194.5 196 1.5 25.92 -

which includes 195.4 195.7 0.3 124.52 -

and also including 196.9 197.2 0.3 25.22 -
TUDDH-653
53 56.9 3.9 9.53 -

including 55.1 56.9 1.8 19.47 -

which includes 56 56.3 0.3 46.92 -

and 56.6 56.9 0.3 55.08 -
TUDDH-653
89.5 96.3 6.8 9.96 -

including 91.3 92.2 0.9 66.62 -

which includes 91.6 91.9 0.3 165.95 -

and 91.9 92.2 0.3 30.46 -
TUDDH-655
96.4 97.9 1.5 8.24 -

including 96.7 97 0.3 18.48 -

and 97.6 97.9 0.3 20.77 -
TUDDH-656
101.9 103.1 1.2 13.5 0.37

including 101.9 102.5 0.6 19.73 -

and 102.5 103.1 0.6 6.54 -

Table 3. Highlights of composited grade control drill results in the Zone 5 area. Reproduction of Table 2 from the August 10, 2023 news release, with updated composite grades. For full results see Table 5 in the appendix.

Hole ID
From To Interval (m) Au (g/t) Change (g/t)
TGC-0059
57.4 58.3 0.9 7.01 0.13

including 57.4 57.7 0.3 12.89 -

and 58 58.3 0.3 8.14 -
TGC-0061
55.8 58.2 2.4 3.43 0.03

including 57.3 37.6 0.3 12.84 -
TGC-0065
45.3 45.6 0.3 35.98 -0.22
TGC-0065
49.2 50.7 1.5 5.44 -0.24

including 49.2 49.5 0.3 9.59 -

and 50.4 50.7 0.3 15.76 -
TGC-0065
52.2 52.5 0.3 31.87 -1.64
TGC-0067
48.2 50 1.8 314.27 52.34

including 48.8 49.4 0.6 934.91 -

which includes 48.8 49.1 0.3 1839.55 -

and 49.1 49.4 0.3 30.26 -
TGC-0067
53.3 54.2 0.9 104 10.95

including 53.3 53.9 0.6 155.68 -

which includes 53.3 53.6 0.3 10.89 -

and 53.6 53.9 0.3 300.47 -



Figure 1. Location of Zone 5 Infill and Grade Control Drillholes. Reproduced from August 10, 2023 news release for context. Left image: Plan view of Tuvatu showing Zone 5 infill and grade control drillholes in relation to the mineralized lodes. Drillholes are shown in black, mineralized lodes in pale grey, and underground developments in red. The yellow dashed square represents the area illustrated in the image on the right. Right image: Oblique view of Zone 5 infill and grade control drilling looking approximately northeast. Infill drilling was conducted from surface whereas grade control drilling was conducted from underground.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/177254_5cfe2f3d644c0822_001full.jpg



Figure 2. Location of High-Grade Intercepts from Zone 5 Drilling. Updated figure from the August 10, 2023 news release, with updated composite gold intervals. Composite intervals with grades between 3 and 10 g/t Au are shown in yellow, intervals with grades between 10 and 30 g/t Au are shown in red, and intervals over 30 g/t Au are shown in purple. Select high-grade intervals are identified. Image is looking approximately north-northeast, grades are gold grades in g/t.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/177254_5cfe2f3d644c0822_002full.jpg

About Tuvatu
The Tuvatu Alkaline Gold Project is located on the island of Viti Levu in Fiji. The January 2018 mineral resource for Tuvatu as disclosed in the technical report "Technical Report and Preliminary Economic Assessment for the Tuvatu Gold Project, Republic of Fiji", dated September 25, 2020, and prepared by Mining Associates Pty Ltd of Brisbane Qld, comprises 1,007,000 tonnes indicated at 8.50 g/t Au (274,600 oz. Au) and 1,325,000 tonnes inferred at 9.0 g/t Au (384,000 oz. Au) at a cut-off grade of 3.0 g/t Au. The technical report is available on the Lion One website at www.liononemetals.com and on the SEDAR website at www.sedar.com.

Qualified Person
In accordance with National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101"), Sergio Cattalani, P.Geo, Senior Vice President Exploration, is the Qualified Person for the Company and has reviewed and is responsible for the technical and scientific content of this news release.

QAQC Procedures
Lion One adheres to rigorous QAQC procedures above and beyond basic regulatory guidelines in conducting its sampling, drilling, testing, and analyses. The Company utilizes its own fleet of diamond drill rigs, using PQ, HQ and NQ sized drill core rods. Drill core is logged and split by Lion One personnel on site. Samples are delivered to and analyzed at the Company's geochemical and metallurgical laboratory in Fiji. Duplicates of all samples with grades above 0.5 g/t Au are both re-assayed at Lion One's lab and delivered to ALS Global Laboratories in Australia (ALS) for check assay determinations. All samples for all high-grade intercepts are sent to ALS for check assays. All samples are pulverized to 85% passing through 75 microns. Gold analysis is carried out using fire assay with an AA finish. Samples that have returned grades greater than 10.00 g/t Au are then re-analyzed by gravimetric method. For samples that return greater than 0.50 g/t Au, repeat fire assay runs are carried out and repeated until a result is obtained that is within 10% of the original fire assay run. Lion One's laboratory can also assay for a range of 71 other elements through Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), but currently focuses on a suite of 9 important pathfinder elements. All duplicate anomalous samples are sent to ALS labs in Townsville QLD and are analyzed by the same methods (Au-AA26, and Au-GRA22 where applicable). ALS also analyses 33 pathfinder elements by HF-HNO3-HClO4 acid digestion, HCl leach and ICP-AES (method ME-ICP61).

About Lion One Metals Limited
Lion One's flagship asset is 100% owned, fully permitted high grade Tuvatu Alkaline Gold Project, located on the island of Viti Levu in Fiji. Lion One envisions a low-cost high-grade underground gold mining operation at Tuvatu coupled with exciting exploration upside inside its tenements covering the entire Navilawa Caldera, an underexplored yet highly prospective 7km diameter alkaline gold system. Lion One's CEO Walter Berukoff leads an experienced team of explorers and mine builders and has owned or operated over 20 mines in 7 countries. As the founder and former CEO of Miramar Mines, Northern Orion, and La Mancha Resources, Walter is credited with building over $3 billion of value for shareholders.

On behalf of the Board of Directors of Lion One Metals Ltd.
"Walter Berukoff", Chairman and CEO

Contact Investor Relations
Toll Free (North America) Tel: 1-855-805-1250
Email: info@liononemetals.com
Website: www.liononemetals.com

Neither the TSX Venture Exchange nor its Regulation Service Provider accepts responsibility for the adequacy or accuracy of this release

This press release may contain statements that may be deemed to be "forward-looking statements" within the meaning of applicable Canadian securities legislation. All statements, other than statements of historical fact, included herein are forward-looking information. Generally, forward-looking information may be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "proposed", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases, or by the use of words or phrases which state that certain actions, events or results may, could, would, or might occur or be achieved. This forward-looking information reflects Lion One Metals Ltd.'s current beliefs and is based on information currently available to Lion One Metals Ltd. and on assumptions Lion One Metals Ltd. believes are reasonable. These assumptions include, but are not limited to, the actual results of exploration projects being equivalent to or better than estimated results in technical reports, assessment reports, and other geological reports or prior exploration results. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Lion One Metals Ltd. or its subsidiaries to be materially different from those expressed or implied by such forward-looking information. Such risks and other factors may include, but are not limited to: the stage development of Lion One Metals Ltd., general business, economic, competitive, political and social uncertainties; the actual results of current research and development or operational activities; competition; uncertainty as to patent applications and intellectual property rights; product liability and lack of insurance; delay or failure to receive board or regulatory approvals; changes in legislation, including environmental legislation, affecting mining, timing and availability of external financing on acceptable terms; not realizing on the potential benefits of technology; conclusions of economic evaluations; and lack of qualified, skilled labour or loss of key individuals. Although Lion One Metals Ltd. has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Accordingly, readers should not place undue reliance on forward-looking information. Lion One Metals Ltd. does not undertake to update any forward-looking information, except in accordance with applicable securities laws.

Appendix 1: Full Drill Results and Collar Information

Table 4. Updated composite results from infill drillholes in the Zone 5 area (grade >0.5 g/t Au). Bolded text indicates a positive change from the originally reported value, italicized text represents a negative change.

Hole ID
From To Interval (m) Au (g/t) Change (g/t)
TUDDH-634
92.2 92.8 0.6 0.52 -
TUDDH-634
93.7 94.3 0.6 0.5 -
TUDDH-634
123.4 124 0.6 25.19 -0.76
TUDDH-634
125.2 125.5 0.3 1 -
TUDDH-634
128.5 129.4 0.9 7.42 0.62
TUDDH-634 including 129.1 129.4 0.3 10.89 -
TUDDH-634
148.5 149.1 0.6 1.46 -
TUDDH-637
48.2 48.8 0.6 0.6 -
TUDDH-637
68.8 69.4 0.6 0.81 -
TUDDH-637
161.7 163.2 1.5 16.13 0.17
TUDDH-637 including 161.7 162.3 0.6 38.62 -
TUDDH-637 which includes 161.7 162 0.3 72.46 -
TUDDH-637
173.1 177.6 4.5 2.69 -
TUDDH-637 including 173.1 174 0.9 8.59 -
TUDDH-637
180 182.1 2.1 2.7 -
TUDDH-637
183.9 187.5 3.6 2.76 -
TUDDH-637 including 185.7 187.5 1.8 5.03 -
TUDDH-637
198.2 202.1 3.9 5.38 -
TUDDH-637 including 198.2 198.5 0.3 10.02 -
TUDDH-637 and 199.7 200.6 0.9 3.42 -
TUDDH-637 and 201.2 202.1 0.9 16.13 -
TUDDH-637 which includes 201.8 202.1 0.3 40.21 -
TUDDH-637
219.2 220.4 1.2 10.31 1.99
TUDDH-637 including 219.5 220.4 0.9 12.79 -
TUDDH-637
222.2 222.5 0.3 2.29 -
TUDDH-637
224 226.4 2.4 1.87 -
TUDDH-637
243.5 245 1.5 1.13 -
TUDDH-637
251.3 253.7 2.4 2.46 -
TUDDH-637
258.5 259.1 0.6 0.94 -
TUDDH-637
281.9 282.5 0.6 5.96 -
TUDDH-637
290.9 292.1 1.2 1.97 -
TUDDH-637
298.7 299.6 0.9 6.68 -
TUDDH-638
14.2 14.8 0.6 1.31 -
TUDDH-638
29.8 30.4 0.6 1.29 -
TUDDH-638
106.9 107.2 0.3 0.99 -
TUDDH-638
123.1 123.7 0.6 1.44 -
TUDDH-638
154.9 155.2 0.3 14.96 -0.21
TUDDH-638
162.4 163.3 0.9 3.19 -
TUDDH-638
166.3 167.5 1.2 6.23 -
TUDDH-638 including 166.3 166.9 0.6 8.43 -
TUDDH-638
169.9 171.7 1.8 3.6 -
TUDDH-638 including 170.8 171.7 0.9 6.07 -
TUDDH-638
179.8 181.3 1.5 1.62 -
TUDDH-638
235.9 236.5 0.6 0.87 -
TUDDH-638
241.3 242.5 1.2 4.8 -
TUDDH-638 including 241.9 242.5 0.6 9.06 -
TUDDH-639
50.3 50.6 0.3 5.17 -
TUDDH-641
153 153.7 0.7 2.78 -
TUDDH-641 including 153 153.3 0.3 5.1 -
TUDDH-641
174.5 174.8 0.3 0.57 -
TUDDH-641
176.9 178.7 1.8 2.32 -
TUDDH-641 including 176.9 177.5 0.6 5.1 -
TUDDH-643
111.6 114.9 3.3 18.4 0.92
TUDDH-643 including 111.6 113.7 2.1 28.44 -
TUDDH-643 which includes 113.1 113.7 0.6 95.63 -
TUDDH-643
133.4 133.7 0.3 10.86 0.49
TUDDH-643
158.8 159.1 0.3 0.83 -
TUDDH-643
163.3 163.9 0.6 5.3 -
TUDDH-643
173.6 173.9 0.3 11.66 1.52
TUDDH-643
213.7 214.6 0.9 0.61 -
TUDDH-643
216.4 217 0.6 11.63 0.64
TUDDH-643
233.8 234.4 0.6 5.48 -
TUDDH-643
242.7 249.3 6.6 83.47 2.69
TUDDH-643 including 242.7 246.3 3.6 17.39 -
TUDDH-643 which includes 243.9 245.7 1.8 55.49 -
TUDDH-643 which includes 243.9 244.5 0.6 79.84 -
TUDDH-643 and 245.1 245.7 0.6 14.89 -
TUDDH-643 and also including 247.5 249.3 1.8 271.14 -
TUDDH-643 which includes 247.5 247.8 0.3 40.03 -
TUDDH-643 and 248.7 249.6 0.6 793.24 -
TUDDH-643
251.7 252.9 1.2 0.97 -
TUDDH-643
254.7 257 2.3 10.25 0.84
TUDDH-643 including 254.7 255.3 0.6 35.54 -
TUDDH-643
260.4 261.3 0.9 0.69 -
TUDDH-643
262.8 266.1 3.3 1.63 -
TUDDH-643
268.3 268.8 0.5 1.3 -
TUDDH-644
172.3 175 2.7 2.33 -
TUDDH-644 including 173.8 174.4 0.6 5.83 -
TUDDH-644
208.6 208.9 0.3 4.37 -
TUDDH-644
220.3 220.6 0.3 10.87 -1.98
TUDDH-644
237.1 237.7 0.6 1.19 -
TUDDH-646
116.7 117.3 0.6 1.65 -
TUDDH-646
154.8 155.1 0.3 0.67 -
TUDDH-646
181.5 183.3 1.8 2.41 -
TUDDH-646 including 183 183.3 0.3 13.29 -
TUDDH-646
223.9 224.5 0.6 8.98 -
TUDDH-646 including 224.2 224.5 0.3 15.09 -
TUDDH-646
231.1 233.2 2.1 4.23 -
TUDDH-646 including 232 232.6 0.6 10.27 -
TUDDH-646
252.3 252.7 0.4 2.81 -
TUDDH-646
253.9 254.2 0.3 2.16 -
TUDDH-649
24.9 25.2 0.3 1.93 -
TUDDH-649
153.6 154.2 0.6 0.74 -
TUDDH-649
161.7 162.3 0.6 0.52 -
TUDDH-649
188.1 190.8 2.7 1.21 -
TUDDH-649
248.7 249.3 0.6 1.17 -
TUDDH-649
251.4 252.3 0.9 0.86 -
TUDDH-649
257.1 257.4 0.3 3.31 -
TUDDH-650
53.6 53.9 0.3 0.61 -
TUDDH-650
76.7 77 0.3 0.62 -
TUDDH-650
104.1 104.4 0.3 0.67 -
TUDDH-650
148.5 149.1 0.6 0.51 -
TUDDH-650
179.1 179.4 0.3 1.62 -
TUDDH-650
180.6 181.2 0.6 0.51 -
TUDDH-650
192.6 194.1 1.5 14.93 -
TUDDH-650 including 192.6 193.5 0.9 23.89 -
TUDDH-650
199 199.3 0.3 1.66 -
TUDDH-650
203.5 207.4 3.9 11.84 -
TUDDH-650 including 203.5 204.7 1.2 35.18 -
TUDDH-650 which includes 203.5 204.1 0.6 48.27 -
TUDDH-650 and 204.1 204.7 0.6 22.09 -
TUDDH-650
210.4 210.7 0.3 2.05 -
TUDDH-651
18.25 18.85 0.6 0.93 -
TUDDH-651
80.55 81.15 0.6 2.09 -
TUDDH-651
100.65 100.95 0.3 1.46 -
TUDDH-651
118.65 119.25 0.6 1.46 -
TUDDH-651
139.95 140.55 0.6 4.39 -
TUDDH-651
184.6 185.2 0.6 32.65 -
TUDDH-651
194.5 197.2 2.7 17.2 -
TUDDH-651 including 194.5 196 1.5 25.92 -
TUDDH-651 which includes 195.4 195.7 0.3 124.52 -
TUDDH-651 and also including 196.9 197.2 0.3 25.22 -
TUDDH-651
222.4 224.8 2.4 2.22 -
TUDDH-653
0 0.6 0.6 3.37 -
TUDDH-653
21.9 22.2 0.3 1.26 -
TUDDH-653
53 56.9 3.9 9.53 -
TUDDH-653 including 55.1 56.9 1.8 19.47 -
TUDDH-653 which includes 56 56.3 0.3 46.92 -
TUDDH-653 and 56.6 56.9 0.3 55.08 -
TUDDH-653
64.4 65 0.6 0.56 -
TUDDH-653
89.5 96.3 6.8 9.96 -
TUDDH-653 including 91.3 92.2 0.9 66.62 -
TUDDH-653 which includes 91.6 91.9 0.3 165.95 -
TUDDH-653 and 91.9 92.2 0.3 30.46 -
TUDDH-653
111.6 111.9 0.3 6.53 -
TUDDH-653
116.7 118.8 2.1 1.59 -
TUDDH-653
120 120.6 0.6 0.59 -
TUDDH-655
59.7 61.5 1.8 2.74 -
TUDDH-655
96.4 97.9 1.5 8.24 -
TUDDH-655 including 96.7 97 0.3 18.48 -
TUDDH-655 and 97.6 97.9 0.3 20.77 -
TUDDH-655
99.1 99.7 0.6 0.9 -
TUDDH-655
101.5 102.1 0.6 1.23 -
TUDDH-655
118.3 118.6 0.3 3.16 -
TUDDH-655
126.1 126.7 0.6 1.04 -
TUDDH-656
27.2 28.4 1.2 0.89 -
TUDDH-656
77 77.6 0.6 1.05 -
TUDDH-656
80.6 81.2 0.6 0.7 -
TUDDH-656
101.9 103.1 1.2 13.5 0.37
TUDDH-656 including 101.9 102.5 0.6 19.73 -
TUDDH-656 and 102.5 103.1 0.6 6.54 -
TUDDH-656
106.7 107 0.3 0.58 -
TUDDH-656
119.6 119.9 0.3 1.71 -
TUDDH-656
130.1 132.5 2.4 4.83 -
TUDDH-656 including 131.9 132.5 0.6 7.99 -
TUDDH-656
162.5 162.8 0.3 8.55 -

Table 5. Updated composite results from grade control drillholes in the Zone 5 area (grade >0.5 g/t Au). Bolded text indicates a positive change from the originally reported value, italicized text represents a negative change.

Hole ID
From To Interval (m) Au (g/t) Change (g/t)
TGC-0056
26.7 29.4 2.7 1.52 -
TGC-0056
38.1 38.4 0.3 2.31 -
TGC-0056
39.6 39.9 0.3 0.73 -
TGC-0058
34.2 34.8 0.6 0.66 -
TGC-0058
35.4 35.7 0.3 0.51 -
TGC-0058
48.3 48.6 0.3 4.83 -
TGC-0058
53.1 55.2 2.1 3.91 0.09
TGC-0058 including 53.1 54 0.9 8.74 -
TGC-0058
56.4 57 0.6 1.1 -
TGC-0059
39.4 40.3 0.9 0.53 -
TGC-0059
50.5 50.8 0.3 3.1 -
TGC-0059
53.2 54.4 1.2 0.88 -
TGC-0059
57.4 58.3 0.9 7.01 0.13
TGC-0059 including 57.4 57.7 0.3 12.89 -
TGC-0059 and 58 58.3 0.3 8.14 -
TGC-0061
34.2 34.5 0.3 0.69 -
TGC-0061
35.4 36 0.6 0.75 -
TGC-0061
45.6 46.8 1.2 0.56 -
TGC-0061
49.8 50.4 0.6 0.84 -
TGC-0061
55.8 58.2 2.4 3.43 0.03
TGC-0061 including 57.3 37.6 0.3 12.84 -
TGC-0065
29.7 30 0.3 0.61 -
TGC-0065
32.4 33.6 1.2 2.44 -
TGC-0065
45.3 45.6 0.3 35.98 -0.22
TGC-0065
49.2 50.7 1.5 5.44 -0.24
TGC-0065 including 49.2 49.5 0.3 9.59 -
TGC-0065 and 50.4 50.7 0.3 15.76 -
TGC-0065
52.2 52.5 0.3 31.87 -1.64
TGC-0067
23.6 23.9 0.3 1.06 -
TGC-0067
48.2 50 1.8 314.27 52.34
TGC-0067 including 48.8 49.4 0.6 934.91 -
TGC-0067 which includes 48.8 49.1 0.3 1839.55 -
TGC-0067 and 49.1 49.4 0.3 30.26 -
TGC-0067
53.3 54.2 0.9 104 10.95
TGC-0067 including 53.3 53.9 0.6 155.68 -
TGC-0067 which includes 53.3 53.6 0.3 10.89 -
TGC-0067 and 53.6 53.9 0.3 300.47 -
TGC-0067
63.2 63.8 0.6 2.89 -
TGC-0067
67.1 67.4 0.3 9.18 -

Table 6. Collar coordinates for grade control and infill drillholes reported in this release. Coordinates are in Fiji map grid.

Hole ID Easting Northing Elevation Azimuth Dip DEPTH
TGC-0056 1876439 3920583 117 79.6 121.2 9.5
TGC-0058 1876438 3920583 116 62.2 124.6 -11.3
TGC-0059 1876438 3920583 116 74.1 122.5 -22.0
TGC-0061 1876438 3920582 118 82.8 142.6 20.1
TGC-0065 1876438 3920582 117 71.2 133.2 10.6
TGC-0067 1876437 3920581 118 86.9 155.6 12.4
TUDDH-634 1876528 3920501 310 182.5 257.6 -55.3
TUDDH-637 1876557 3920389 352 320.3 292.0 -60.5
TUDDH-638 1876509 3920445 349 257.5 294.3 -66.4
TUDDH-639 1876556 3920389 352 56.6 297.3 -57.0
TUDDH-641 1876477 3920293 402 185.7 309.3 -66.1
TUDDH-643 1876556 3920389 352 274.8 297.1 -63.4
TUDDH-644 1876476 3920293 402 248.5 307.0 -64.3
TUDDH-646 1876557 3920388 352 270.5 283.6 -63.1
TUDDH-649 1876476 3920294 402 262.3 315.7 -66.5
TUDDH-650 1876539 3920395 352 230.8 283.0 -52.0
TUDDH-651 1876539 3920395 352 240.3 293.5 -53.3
TUDDH-653 1876496 3920546 296 131.4 281.2 -46.3
TUDDH-655 1876496 3920546 296 151.7 282.7 -51.5
TUDDH-656 1876539 3920395 352 215.3 306.9 -52.2

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/177254


Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!



Mineninfo
Lion One Metals Ltd.
Bergbau
A1H6MD
CA5362161047
Copyright © Minenportal.de 2006-2024 | MinenPortal.de ist eine Marke von GoldSeiten.de und Mitglied der GoldSeiten Mediengruppe
Alle Angaben ohne Gewähr! Es wird keinerlei Haftung für die Richtigkeit der Angaben und der Kurse übernommen!
Informationen zur Zeitverzögerung der Kursdaten und Börsenbedingungen. Kursdaten: Data Supplied by BSB-Software.