Kimber Resources Intercepts 8 Metres of 1.6 G/T Gold and 224 G/T Silver at Carmen Gold-Silver Deposit, Monterde

VANCOUVER, March 3 /CNW/ - Kimber Resources Inc. (NYSE Amex: KBX, TSX:KBR) is pleased to announce results from a further ten holes from its reverse circulation drilling program at the Carmen deposit at its Monterde Project in Mexico. The ten holes were drilled along the northern end of the main Carmen structure and along the main splay, within the limits of the existing resource of the Carmen deposit. No visible sulphides were noted in any of the drill holes. The holes were designed to intersect the Carmen structure and its main splay vertically between previously reported drill hole intercepts and surface trenches; these holes achieved their objective in each case.

'We are pleased with the recent gold-silver assay results from our drilling in the upper portions of the Carmen structure and its main splay,' said Gordon Cummings, President and CEO of Kimber Resources. 'These ten drill holes were completed as part of our work program to upgrade and expand mineral resources in the upper portions of the Carmen deposit. Each of the holes was successful with good widths and good grades,' he said.

Highlights of assay results from the ten reverse circulation holes drilled at the Carmen deposit are tabulated below, while complete results are attached:

___________________________________________
|Drill hole|From|To |Intercept*|Gold |Silver|
|          |(m) |(m)|   (m)    |(g/t)|(g/t) |
|__________|____|___|__________|_____|______|
|MTR-454   |   2| 36|        34| 0.54| 118.4|
|__________|____|___|__________|_____|______|
|including |  24| 32|         8| 1.61| 224.3|
|__________|____|___|__________|_____|______|
|MTR-455   |  46| 56|        10| 0.68| 266.8|
|__________|____|___|__________|_____|______|
|including |  48| 54|         6| 1.08| 409.3|
|__________|____|___|__________|_____|______|
|and       |  64| 72|         8| 0.14|  82.0|
|__________|____|___|__________|_____|______|
|MTR-458   |   8| 24|        16| 0.23|  79.7|
|__________|____|___|__________|_____|______|
|and       |  36| 76|        40| 0.78|  99.4|
|__________|____|___|__________|_____|______|
|including |  40| 42|         2| 2.01| 240.0|
|__________|____|___|__________|_____|______|
|including |  52| 64|        12| 1.47| 151.6|
|__________|____|___|__________|_____|______|
|MTR-460   |  20| 28|         8| 0.49|  87.9|
|__________|____|___|__________|_____|______|
|including |  24| 26|         2| 1.67| 211.0|
|__________|____|___|__________|_____|______|
|and       |  38| 94|        56| 0.44|  89.7|
|__________|____|___|__________|_____|______|
|including |  54| 60|         6| 1.26| 192.3|
|__________|____|___|__________|_____|______|
|and       |  86| 90|         4| 1.36| 127.5|
|__________|____|___|__________|_____|______|

* True widths are expected to range between 65% and 85% of the intervals reported on the table above.

All drill holes are located on the northern half of the Carmen structure and main splay structure and are located on sections 39 to 49. The purpose of the drilling was to upgrade the resources within the outline of the planned open pit. The drill holes intersected the Carmen structure on average 25 metres below surface and were designed to increase confidence in the continuity of mineralization between previous drilling and surface trenching. Four holes were targeted on the Main Splay to better define resources on that portion of the proposed open pit.

The holes intersected a mixture of felsic, crystal-lithic tuffs and tuff breccia. Mineralization is associated with strong, pervasive silicification with minor phyllic alteration. Silicified zones average 6 metres in width but silver mineralization often extends for tens of metres outside of the strongly silicified zones, particularly into the hanging wall.


Trench results

_________________________________________________________________
|            |       |From| To |Width |Gold |Silver|              |
|    Trench  |Section|(m) |(m) | (m)  |(g/t)|(g/t) |   Structure  |
|____________|_______|____|____|______|_____|______|______________|
|Trench TS47C|     47|   0|19.0|  19.0| 0.55|  87.2|Carmen + Splay|
|____________|_______|____|____|______|_____|______|______________|
|including   |       | 5.3| 6.3|   1.0| 3.35| 140.0|Carmen        |
|____________|_______|____|____|______|_____|______|______________|
|and         |       |17.9|19.0|   1.1| 2.39| 119.0|Splay         |
|____________|_______|____|____|______|_____|______|______________|

The trench TS47C results are encouraging as they extend the surface mineralization 25 metres to the north of trenching for Carmen reported in November 2010.


About Kimber

Kimber owns mineral concessions covering in excess of 39,000 hectares in the prospective Sierra Madre gold-silver belt, including the Monterde property, where three gold-silver mineral resources have already been defined. The most advanced of these, the Carmen deposit, has been extensively drilled and has undergone detailed geologic modeling. The completion of the Preliminary Assessment for Monterde in 2010 represented a significant step forward for Kimber and is expected to lead to further development and more advanced economic studies at the Monterde deposits including the completion of a pre-feasibility study during 2011.



Forward looking statements

Statements in this release may be viewed as forward-looking statements, including statements regarding estimates of mineral resources at Monterde, the preliminary assessment of the Monterde project, the conversion of inferred mineral resources to measured and indicated mineral resources, the conversion of mineral resources to mineral reserves, life of mine estimates, the potential for gold and silver mineral resources in the Carmen and Veta Minitas deposits and other targets within the Monterde project, the further development, expected results and future economic assessments of the Monterde project. When used in this press release, the words 'expect', 'intend', 'hopes', 'should', 'believe', 'may', 'will', 'if', 'anticipates' and similar expressions are intended to identify forward-looking statements. Such statements involve risks and uncertainties that could cause actual results to differ materially from those projected. Such risks and uncertainties include, among others, uncertainty of mineral reserve and resource estimates, risks relating to fluctuations in the price of gold, the inherently hazardous nature of mining-related activities, potential effects on Kimber's operations of environmental regulations in the countries in which it operates, risks due to legal proceedings, risks relating to political and economic instability in certain countries in which it operates, risks related to the use of inferred mineral resources in the preliminary assessment, and uncertainty of being able to raise capital on favourable terms or at all, as well as those risk factors discussed under the headings 'Cautionary Note Regarding Forward-Looking Statements' and 'Risk Factors' in Kimber's latest Annual Report on Form 20-F as recently filed on SEDAR and EDGAR. There are no assurances the Company can fulfil such forward-looking statements and the Company undertakes no obligation to update such statements, except as required by law. Such forward-looking statements are only predictions; actual events or results may differ materially as a result of risks facing the Company, some of which are beyond the Company's control.

The technical information in this news release has been prepared in accordance with Canadian regulatory requirements set out in National Instrument 43-101 and reviewed by Mr. Petrus (Marius) Mare P.Geo., Vice-President Exploration of the Company. The exploration activities at the Monterde project site are carried out under the supervision of Mr. Mare, who is the designated Qualified Person under National Instrument 43-101 for the Monterde project. Mr. Petrus (Marius) Mare, Vice-President Exploration, is the designated Qualified Person (Q.P.) for the Monterde project being responsible for quality control and has verified the data being disclosed. He has determined that the laboratory reports matched the drill sample logs and that the quality control assays fall within reasonable limits. QA/QC procedures incorporate blanks and duplicates inserted at the drill and standards inserted after sample preparation. Sample preparation was done by ALS Chemex at its Chihuahua laboratory. Pulps are analyzed by ALS Chemex at its laboratory in North Vancouver, British Columbia, using 50 gram sub-samples, using fire assay with an AA finish for gold and four-acid digestion and ICP finish for silver from a 0.4 gram subsample. High grade gold or silver intervals are re-assayed by fire assay with gravimetric finish.

Cautionary Note to U.S. Investors - The United States Securities and Exchange Commission permits U.S. mining companies, in their filings with the SEC, to disclose only those mineral deposits that a company can economically and legally extract or produce. Kimber Resources uses certain terms on its website (and certain press releases), such as 'measured,' 'indicated,' and 'inferred,' 'resources,' which the SEC guidelines strictly prohibit U.S. companies from including in their filings with the SEC. U.S. Investors are urged to consider closely the disclosure under the heading 'Cautionary Note to U.S. Investors Regarding Mineral Reserve and Resource Estimates' in our latest annual report on Form 20-F which may be secured from us, or from the SEC's website at http://www.sec.gov/edgar.shtml.

___________________________________________________
|Drill hole|Section|From|To |Intercept*|Gold |Silver|
|          |       |(m) |(m)|   (m)    |(g/t)|(g/t) |
|__________|_______|____|___|__________|_____|______|
|MTR-450   |     39|  10| 30|        20| 0.53|  87.1|
|__________|_______|____|___|__________|_____|______|
|including |       |  14| 15|         2| 1.66|  87.9|
|__________|_______|____|___|__________|_____|______|
|and       |       |  20| 22|         2| 1.50| 166.0|
|__________|_______|____|___|__________|_____|______|
|MTR-451   |     41|   8| 40|        32| 0.45| 102.3|
|__________|_______|____|___|__________|_____|______|
|including |       |  14| 16|         2| 4.02| 367.0|
|__________|_______|____|___|__________|_____|______|
|and       |       |  22| 24|         2| 0.04| 288.0|
|__________|_______|____|___|__________|_____|______|
|MTR-452   |     43|   2| 12|        10| 0.82| 100.9|
|__________|_______|____|___|__________|_____|______|
|including |       |   8| 10|         2| 2.66| 115.0|
|__________|_______|____|___|__________|_____|______|
|MTR-453   |     45|   8| 30|        22| 0.17|  74.3|
|__________|_______|____|___|__________|_____|______|
|MTR-454   |     47|   2| 36|        34| 0.54| 118.4|
|__________|_______|____|___|__________|_____|______|
|including |       |  24| 32|         8| 1.61| 224.3|
|__________|_______|____|___|__________|_____|______|
|MTR-455   |     49|  46| 56|        10| 0.68| 266.8|
|__________|_______|____|___|__________|_____|______|
|including |       |  48| 54|         6| 1.08| 409.3|
|__________|_______|____|___|__________|_____|______|
|and       |       |  64| 72|         8| 0.14|  82.0|
|__________|_______|____|___|__________|_____|______|
|MTR-456   |     43|  10| 28|        18| 0.58|  64.0|
|__________|_______|____|___|__________|_____|______|
|including |       |  20| 22|         2| 1.67| 150.0|
|__________|_______|____|___|__________|_____|______|
|MTR-457   |     44|   6| 44|        38| 0.36|  80.9|
|__________|_______|____|___|__________|_____|______|
|including |       |  36| 42|         6| 0.97| 170.0|
|__________|_______|____|___|__________|_____|______|
|MTR-458   |     45|   8| 24|        16| 0.23|  79.7|
|__________|_______|____|___|__________|_____|______|
|and       |       |  36| 76|        40| 0.78|  99.4|
|__________|_______|____|___|__________|_____|______|
|including |       |  40| 42|         2| 2.01| 240.0|
|__________|_______|____|___|__________|_____|______|
|including |       |  52| 64|        12| 1.47| 151.6|
|__________|_______|____|___|__________|_____|______|
|MTR-460   |     46|  20| 28|         8| 0.49|  87.9|
|__________|_______|____|___|__________|_____|______|
|including |       |  24| 26|         2| 1.67| 211.0|
|__________|_______|____|___|__________|_____|______|
|and       |       |  38| 94|        56| 0.44|  89.7|
|__________|_______|____|___|__________|_____|______|
|including |       |  54| 60|         6| 1.26| 192.3|
|__________|_______|____|___|__________|_____|______|
|and       |       |  86| 90|         4| 1.36| 127.5|
|__________|_______|____|___|__________|_____|______|

For further information:

Matthew Hamilton
Manager of Investor Relations
or
Gordon Cummings, CA
President and CEO

North America Toll Free: 1-866-824-1100
Tel: (604) 669-2251
Fax: (604) 669-8577
Website: http://www.kimberresources.com
Email: news@kimberresources.com