ROBEX/Nampala, Drilling Results Summary of Past Campaigns; Include Gold Values of: 3.45 g/t Over 25 Meters and 1.37 g/t Over 77 Meters Including 4.38 g/t Over 15 Meters
QUEBEC CITY, QUEBEC -- (Marketwire) -- 04/11/11 -- Robex Resources Inc. (TSX VENTURE: RBX) (FRANKFURT: RB4) announces the conclusion of its reverse circulation (RC) drilling campaign of the Nampala deposit. Results of those campaigns have revealed grades such as 3.45 g/t over 25 meters and 1.47 g/t over 57 meters including 3.28 g/t over 14 meters. Those campaigns, totaling 192 drill holes within the oxidized zone of Lens 100, served to complete the drilling at 25 meters spacing (as recommended by Coffey Mining in the 43-101 Resource Calculation report) as well as to define the north-east extension of the Nampala deposit on the Mininko permit. A revised resource calculation is in progress with the purpose of integrating all the results obtained to date. Robex is confident that it will achieve its objective of 350 000 to 375 000 ounces of gold within the oxidized zone. To date, the Nampala deposit contains a resource of 290,000 oz indicated, 419,000 oz inferred on lens 100 and 86,000 oz inferred on lens 200 and 300, for a total of 795,000 oz.
A core drilling campaign of more than 3 000 meters was initiated on the 29 of March 2011. Results from this campaign will be combined to those from the RC campaign in order to confirm previously obtained results. The results from these drill holes will also serve towards the slope calculation requirements needed to design required the mine's plan, as well as to strive to have the indicated resource migrate to measured and indicated. While the deeper drill holes will serve to increase the inferred resource below the oxidized zone.
The following table summarises the overall drilling results obtained during the Nampala RC campaign(i):
------------------------------------------------------------
Average
Bore number grade
Range Length (m) (g/t)
----------------
From To
(m) (m)
------------------------------------------------------------
NRC 09012 30 64 34 1.27
------------------------------------------------------------
NRC 09018 41 73 32 1.18
------------------------------------------------------------
NRC 09019 23 47 24 1.33
----------------------------------------
including 30 46 16 1.60
------------------------------------------------------------
NRC 09047 6 68 52 1.36
----------------------------------------
including 25 54 29 2.04
------------------------------------------------------------
NRC 09065 0 77 77 1.37
----------------------------------------
including 25 40 15 4,38
------------------------------------------------------------
NRC 09069 9 43 34 1.29
------------------------------------------------------------
NRC 09071 12 17 5 1.29
------------------------------------------------------------
NRC 09071 22 32 10 1.09
------------------------------------------------------------
NRC 09071 43 45 2 1.25
----------------------------------------
including 9 14 5 3.05
------------------------------------------------------------
NRC 09077 8 20 12 1.56
----------------------------------------
including 9 14 5 3.05
------------------------------------------------------------
NRC 09078 35 58 23 1.15
----------------------------------------
including 35 40 5 2.91
------------------------------------------------------------
NRC 09079 46 67 21 1.22
----------------------------------------
including 49 54 5 2.80
------------------------------------------------------------
NRC 09103 15 37 22 2.05
------------------------------------------------------------
NRC 09112 16 28 12 5.83
------------------------------------------------------------
NRC 09116 14 41 27 2.14
----------------------------------------
including 17 30 13 3.81
------------------------------------------------------------
Mn2010ac016 18 62 44 1.74
----------------------------------------
including 43 51 8 4.18
------------------------------------------------------------
Mn2010ac017 23 32 9 1.76
------------------------------------------------------------
Mn2010ac017 43 48 5 1.24
------------------------------------------------------------
Mn2010ac021 32 39 7 1.29
------------------------------------------------------------
Mn2010ac021 46 48 2 2.49
------------------------------------------------------------
Mn2010ac021 53 60 7 0.95
------------------------------------------------------------
Mn2011ac005 53 81 28 1.06
----------------------------------------
including 57 70 13 1.72
------------------------------------------------------------
Mn2011ac006 15 72 57 1.47
----------------------------------------
including 34 48 14 3.28
----------------------------------------
including 57 68 11 1.85
------------------------------------------------------------
Mn2011ac007 12 71 59 0.90
----------------------------------------
including 12 44 32 1.25
------------------------------------------------------------
Mn2011ac021 34 62 28 1.04
----------------------------------------
including 57 62 5 2.22
------------------------------------------------------------
Mn2011ac028 30 61 31 1.52
----------------------------------------
including 30 36 6 4.61
------------------------------------------------------------
Mn2011ac032 25 50 25 3.45
----------------------------------------
Including 25 30 5 5.15
----------------------------------------
Including 35 41 6 1.59
----------------------------------------
including 45 50 5 9.87
------------------------------------------------------------
Mn2011ac035 4 77 73 0.93
----------------------------------------
including 21 32 11 2.08
------------------------------------------------------------
Mn2011ac037 68 74 6 1.21
------------------------------------------------------------
Mn2011ac039 11 20 9 1.38
----------------------------------------
including 16 19 3 2.77
------------------------------------------------------------
Mn2011ac039 24 25 1 2.16
------------------------------------------------------------
Mn2011ac039 31 34 3 1.11
------------------------------------------------------------
Mn2011ac039 41 46 5 1.86
------------------------------------------------------------
Mn2011ac039 51 53 2 2.44
------------------------------------------------------------
Mn2011ac040 4 23 19 1.97
------------------------------------------------------------
Furthermore, results previously obtained during a reverse circulation (RC) drilling campaign at N'Golola within the Mininko permit, located at 6 km South south-west of Nampala, indicates the possibility of another high potential zone within the Mininko permit. Results collected during the drilling campaign of N'Golola (see press release dated 19 January 2006).
Results collected during the drilling campaign of N'Golola from October 2005 to January 2006 (see press release dated 19 January 2006).
----------------------------------------------------------------
Length Average grade
Bore number Range (m) (g/t)
----------------
From To
(m) (m)
----------------------------------------------------------------
NRC 586 26 39 13 3.72
----------------------------------------------------------------
NRC 586 81 83 2 1.51
----------------------------------------------------------------
NRC 608 59 63 4 1.32
----------------------------------------------------------------
NRC 612 35 37 2 2.57
----------------------------------------------------------------
NAC 613 97 106 9 3.95
----------------------------------------------------------------
including 97 100 3 4.18
----------------------------------------------------------------
including 103 106 3 7.61
----------------------------------------------------------------
Recalling that Bumigeme Inc., a Canadian company with a vast experience in the development of dressing procedures and mineral plants operation, has been awarded the contract for performing the Nampala project feasibility study whose purpose is to define the application modalities of an open-pit mining operation using a 5,000 tons a day cyanide processing plant. The metallurgical tests, recently conducted on the ore, showed high recoveries and low reagent consumption (see press release of February 16, 2011).
The engineering firm Met-Chem has been hired to develop the mine plan for this Feasibility study, as announced in the March 2nd, 2011 press release has just initiated the required field visits in order to define the application modalities.
Robex is also:
-- The N'Golopene permit, located directly on the extension of the gold
anomaly at the Syama mine (gold producing property owned by Resolute
Mining Ltd., which contains over 6 million ounces of gold and produced
77,926 ounces in 2010);
-- The Diangounte permit, located only a few kilometers from the Sadiola
and Yatela mines (property owned by IAMGOLD and AngloGold Ashanti, which
contains 8.5 million ounces of gold and produced 178,000 ounces in
2010);
-- The Wili-Wili and Wili-Wili West permits, characterised by a large gold-
bearing dispersion 2.8 km by 600 m wide and immediately adjacent to the
Siribaya project owned by IAMGOLD and Merrex;
-- The Sanoula permit, surrounded by Golden Rim permits, with which
discussions are in progress concerning an eventual joint venture;
-- The Kolomba permit, which produced good results in earlier campaigns and
is currently overrun with artisanal gold panners.
In addition, Robex has two RC drilling machines, along with the advantage of an experienced drilling team, which renders the company independent in conducting its own RC drilling campaigns.
For more details on the other Robex permits, see: www.robexgold.com
(i)Samples were analysed by the ALS Mali sarl laboratory group following the FA / AA (fire assay / atomic absorption) method.
The technical content of this release as well as the results which are set out have been checked by Jacques Marchand, P.Eng. P.Geo,geological engineer and an independent qualified individual.
This press release contains statements that may constitute 'forward-looking information' or 'forward-looking statements' as set out within the context of security law. This forward-looking information is subject to many risks and uncertainties, some of which are beyond Robex Inc.'s ('Robex') control. The actual results or conclusions may differ considerably from those which have been set out, or intimated, in this forward-looking information. There are many factors which may cause such disparity, especially the instability of metal market prices, the results of fluctuations in foreign currency exchange rates or in interest rates, poorly estimated reserves, environmental risks (stricter regulations), unforeseen geological situations, unfavorable extraction conditions, political risks brought on by mining in developing countries, regulatory and governmental policy changes (laws and policies), failure to obtain the requisite permits and approvals from government bodies, or any other risk relating to mining and development. There is no guarantee that the circumstances anticipated in this forward-looking information will occur, or if they do occur, how they will benefit Robex. The forward-looking information is based on the estimates and opinions of Robex's management at the time of the publication of the information and Robex does not assume any obligation to make public updates or modifications to any of the forward-looking statements, whether as a result of new information, future events, or any other cause, except if it is required by securities laws.
Neither TSX Venture Exchange nor the regulatory service provider (as the term is defined in TSX Venture Exchange's policies) accepts any liability of any kind as to the authenticity or accuracy of this release.
Contacts:
Investor relations
Andre Gagne
President and Chief Executive Officer
418-527-5023
a.gagne@robexgold.com
Skype: andregagne1