Sienna Gold's Excellent Drilling Results Continue in Peru

CALGARY, July 23, 2012 - Sienna Gold Inc. ("Sienna" or the "Company") (TSX VENTURE:SGP) (LMA:SGP) is pleased to announce the latest results from new drill holes at Callanquitas, on the Igor project, La Libertad, Peru. The five holes totalled 1266.3 meters (m).


Drill Results

These come from Holes CA-12-43 to CA-12-47, which were drilled on three different sections. All holes, with the exception of CA-12-44, cut several mineralized structures.

Drill hole CA-12-45 gave excellent results: 19.6 m at 4.5 grams/tonne (g/t) gold and 17.3 g/t silver. Likewise CA-12-43, with 4.4 m at 6.2 g/t gold. Furthermore, CA-12-46 gave 4.45 m at 6.1 g/t gold and 87 g/t silver.

High silver grades are present in other holes. CA-12-47 gave 56.1 m at 154.3 g/t silver and 0.6 g/t gold.

Full results are given in the table below. A map of hole locations is shown below, as is Section NW4690. Further maps and cross sections are available on the Sienna Gold website.

To view the map associated with this release, please see the following link:
http://media3.marketwire.com/docs/720sgp_map.pdf


The Callanquitas Structure

Dr. Warren Pratt, Director of Sienna Gold Inc, comments, "Drilling is proceeding very well. These holes were mostly 'infill' or aimed to extend the mineralization vertically. The Callanquitas Structure is everywhere cut more or less where predicted and grades are consistent. The drilling is targeted very carefully, on 50 m centres, so that every intersection counts in a final resource calculation. Modifications now mean that we can drill horizontally, allowing us to better define the top 75 m or 100 m below the surface. Since high grades occur in surface trenches (up to 61.4 g/t gold), we expect this shallow part of the Callanquitas Structure to contribute considerably to the final resource.

The good drilling progress should allow us to bring forward the new resource calculation for Callanquitas to late October 2012 (final NI 43-101 report to follow in late 2012)."


Assay results for drill holes CA-12-43 to CA-12-47.

Drill Hole    From    To    Interval (2)   Weighted Averages (1)
              (m)    (m)       (m)        Gold (g/t)   Ag (g/t)
CA-12-43 	123.00 		128.90 		5.90 		0.4 		1.1 	
CA-12-43 	135.50 		149.40 		13.90 		2.1 		5.4 	
including 	145.00 		149.40 		4.40 		6.2 		10.4 	
CA-12-43 	154.20 		159.00 		4.80 		0.4 		2.4 	
including 	158.50 		159.00 		0.50 		2.8 		10.3
CA-12-44 	336.70 		383.10 		46.40 (3) 	0.7 		45.1 	
including 	344.70 		349.30 		4.60 		0.9 		103.0 	
including 	363.50 		370.70 		7.20 		2.5 		107.8
CA-12-45 	23.00 		38.00 		15.00 		0.4 		2.0 	
CA-12-45 	63.00 		72.00 		9.00 		0.3 		10.6 	
CA-12-45 	108.00 		156.70 		48.70 		1.9 		8.4 	
including 	134.80 		154.40 		19.60 		4.5 		17.3 	
including 	139.10 		148.50 		9.40 		7.3 		28.8
CA-12-46 	11.00 		56.70 		45.70 		0.3 		1.2 	
CA-12-46 	74.80 		112.30 		37.50 		1.0 		25.4 	
including 	98.70 		103.15 		4.45 		6.1 		87.4
CA-12-47 	12.50 		18.00 		5.50 		1.8 		18.7 	
CA-12-47 	35.20 		53.30 		18.10 		0.2 		2.6 	
CA-12-47 	120.00 		139.00 		19.00 		0.1 		48.0 	
including 	120.00 		133.50 		13.50 		0.1 		60.2 	
including 	129.00 		130.40 		1.40 		0.2 		310.0 	
CA-12-47 	148.20 		272.50 		124.30 		0.6 		84.6 	
including 	162.00 		218.10 		56.10 (4) 	0.6 		154.3 	
including 	243.30 		249.60 		6.30 		1.0 		211.9 	
including 	262.00 		269.00 		7.00 		2.7 		26.3

(1) It should be noted that these are all angled holes and downhole intervals do not necessarily reflect the true width of the mineralized structure.

(2) Weighted averages were calculated for continuously mineralized intervals using a bottom cut on 0.1 - 0.2 g/t gold, no top cut and minimum internal waste.

(3) This interval contains a 6.0 m zone of no recovery.

(4) This interval contains a 6.3 m zone of no recovery.

A full list of drill holes and significant intercepts is available on the website: www.siennagold.com.


Exploration Update

Two rigs continue on site: one large tracked rig and a man portable rig. A total of 13,500 m has been drilled to date.

The new resource for the Callanquitas Structure, based on approximately 20,000 m of drilling, should be published in mid- to late October with the full NI 43-101 report to follow before the end of the year.

Drilling will, however, continue at Callanquitas and extend to Domo and Tesoros in late 2012/early 2013.


Sampling Methodology

Cores taken from the diamond drill rig are stored in plastic core boxes and transported to the camp for detailed geotechnical and geological logging. Density and Point Load testing are carried out. Afterwards, the core is cut on site with a diamond saw. One half is then sent to an accredited laboratory in various sample lengths. Randy Henkle (PGeol), the Company's independent Qualified Person, completed a chain of custody review to ensure the integrity of all sample data.


Assaying Methodology

The samples are analysed by SGS Laboratories in Lima by inductively coupled plasma atomic emission spectroscopy for silver and 37 other elements (included Hg and Te) and a 30 gram fire assay technique for gold. Samples above detection limits are re-assayed using a gravimetric fire assay. The specific lab procedures can be found in the Company's 43-101 report on the Igor property.

This press release was reviewed and approved by Dr. Warren Pratt (CGeol) who is a "Qualified Person" according to National Instrument 43-101.

Sienna Gold Inc. is a gold exploration company with property interests in Peru. Its key prospect is the Igor Mine Project, a formerly producing mine that the Corporation is exploring further.

If you wish any further information, please feel free to contact John Rucci at any of the contact points noted above.


John M. Rucci
President



WARNING: the Company relies upon litigation protection for "forward looking" statements. The information in this release may contain forward-looking information under applicable securities laws. This forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause actual results to differ materially from those implied by the forward-looking information. Factors that may cause actual results to vary materially include, but are not limited to, inaccurate assumptions concerning the exploration for and development of mineral deposits, currency fluctuations, unanticipated operational or technical difficulties, changes in laws or regulations, the risks of obtaining necessary licenses and permits, changes in general economic conditions or conditions in the financial markets and the inability to raise additional financing. Readers are cautioned not to place undue reliance on this forward-looking information. The Company does not assume the obligation to revise or update this forward-looking information after the date of this release or to revise such information to reflect the occurrence of future unanticipated events, except as may be required under applicable securities laws.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.



Contact

Sienna Gold Inc.
John Rucci
403-508-2061
403-508-2670 (FAX)
rucci@siennagold.com

Sienna Gold Inc.
Suite 1100, 800 6th Avenue S.W.
Calgary, Alberta
Canada T2P 3G3
www.siennagold.com