Belvedere Resources Ltd.: Osikonmaki East Hanging Wall Gold Zone Extended to 200m Down-Plunge
Highlights
- BELOSI098 intersects 16.7m @ 2.2 g/t Au extending the HW zone to 200m down-plunge from surface
- BELOSI096 intersects 12.6 m @ 1.6 g/t Au defining up-dip limits to HW zone
Two holes BELOSI 96 and 98 were drilled in the eastern end of the Osikonmäki shear zone aimed at extending the high grade hanging wall zone discovered in 2011. BELOSI 097 was drilled to investigate one of the anomalies resulting from the recent geophysical survey and though it intersected shearing and sulphides did not contain significant gold. More drilling needs to be completed in this area given the lode nature of the mineralization and the size of the geophysical anomaly.
David Pym (CEO) comments, "Since its discovery in 2011 the HW zone has continued to extend in size. BELOSI098 was important as it proved the continuity of the zone east of a late granite dyke which cuts the zone. The HW zone, though still open in all directions is now of similar dimensions to the S, T and U lodes which comprise the bulk of the mineralization outlined to date, and will be an important contributor to expanding the current resource, particularly as it is of higher average grade then the other lodes."
HOLE_ID FROM (m) TO (m) Interval (m) Au g/t Cu ppm GT
BELOSI096 29.73 36.16 6.43 0.77 298 5
BELOSI096 51.72 55.57 3.85 0.75 146 2.9
BELOSI096 61.11 73.7 12.59 1.65 274 20.8
incl. 61.11 65.77 4.66 1.43 295 6.7
incl. 69.59 73.25 3.66 3.71 456 13.6
BELOSI098 108.13 124.81 16.68 2.21 490 36.9
incl. 108.13 112.07 3.94 5.03 780 19.8
incl. 119.41 124.81 5.4 2.84 682 15.3
Table 1: Intersections using a 0.5 g/t Au cut-off with a grade thickness (GT= grade x thickness) greater than 2 gram metres. No top cut is applied. Maximum grade is 16.05 g/t Au over 0.97m, one of four individual samples over 5 g/t Au. Intersections are estimated to be 70-90% of true width. BELOSI 97 returned no significant intercepts, although did contain anomalous levels of gold.
HoleID Easting Northing Elevation Depth Azimuth Dip
BELOSI096 3564360 6883177 117.27 83.15 173 60
BELOSI097 3564400 6883391 114.63 70.3 0 55
BELOSI098 3564440 6883085 115.75 137.55 0 55
Table 2: Details of drillhole locations
The drilling was undertaken by Drillcon SMOY of Finland, providing 42 mm diameter core. Samples are comprised of half diamond core. Intersections are estimated to be 70-90% of true width. No top cuts are applied with the highest individual assay being 5.15 g/t gold over 0.95 metres. Core samples are sawn in half on site, prepped and assayed by 30g fire assay with an AAS finish at the internationally accredited laboratories of ALS Chemex in Finland. The quality assurance-quality control (QAQC) program consists of the insertion of certified standards of known gold content every 20 samples, with blanks at the beginning of each batch. In addition, ALS Chemex inserts a number of blanks and standards into the analytical process. Standards, blanks and duplicates make up approximately 15% of the samples assayed. The remaining half core is retained on site for verification and reference purposes.
About Belvedere:
Belvedere Resources Limited is a mining company incorporated in British Columbia with a primary focus on nickel, gold, cobalt and copper in Finland. The Company currently produces 2200t of nickel in concentrate/year from the Hitura nickel mine in Central Finland. The Company has a number of advanced gold projects in close proximity to the Hitura mine.
About the Joint Venture with REBgold (TSX VENTURE:RBG)
REBgold Corporation has the right to earn up to a 50% interest in a special purpose joint venture company which holds the Kiimala and Rantasalmi projects by contributing expenditures of C$6 million over a 4 year period. If REBgold proceeds with and completes the feasibility study it will increase its stake in the projects to between 55% and 75% depending on the level of Belvedere's contribution to the study. A further 5% can be earned if REBgold's bioleaching technology can lead to a material improvement in the project economics. REBgold currently owns 14% of the project.
Forward Looking Statement:
Some of the statements contained herein may be forward-looking statements, which involve known and unknown risks and uncertainties. Without limitation, statements regarding future plans and objectives of the Company (including statements relating to future drilling and interpreted continuity of the new mineralised zones) are forward-looking statements that involve various degrees of risk. It is important to note that the Company's actual results could differ materially from those in such forward-looking statements.
Qualified Person
The technical aspects of this statement have been prepared by Dr Toby Strauss (CGeol), Chief Operating Officer of Belvedere Resources Ltd, who is acting as a Qualified Person in compliance with National Instrument 43-101 with respect to this release. Dr Strauss has verified the data supporting this press release. Verification included checking the data to the original Laboratory certificates, examining photographs of the core, reviewing sampling procedures and reviewing the geological interpretation.
BELVEDERE RESOURCES LTD.
David Pym, CEO; Suite #404, Vancouver World Trade Centre, 999 Canada Place, Vancouver. BC. V6C 3E2, Canada
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Contact
Humbercrest Capital Inc.
Scott Findlay
+1 647 274 2536
www.belvedere-resources.com