• Montag, 23 Dezember 2024
  • 07:11 Uhr Frankfurt
  • 06:11 Uhr London
  • 01:11 Uhr New York
  • 01:11 Uhr Toronto
  • 22:11 Uhr Vancouver
  • 17:11 Uhr Sydney

Standard Graphite Drills 52.9m of 7.5% Graphite Including 22.9 m of 12.9% Cg

21.11.2012  |  Marketwire
VANCOUVER, 11/21/12 - Standard Graphite Corporation (TSX VENTURE: SGH) (the "Company") is pleased to report the initial results from the validation portion of the summer 2012 diamond drilling program on its Mousseau East Deposit. The results are currently being integrated in the database to allow comparison with their historical equivalents.


Highlight Intervals Include:

- M12-01 52.9m of 7.5% Cg, Including 22.9m of 12.9% Cg
- M12-03 18.9m of 9.7% Cg
- M12-04 29.9m of 8.3% Cg
- M12-06 24.6m of 10.6% Cg
- M12-07 15.5m of 11.2% Cg
- M12-10 15.3m of 11.6% Cg

It is of significance to note that M12-01 was emplaced between the main zone and the SW extension confirming the continuity between the two zones. The historical resource did not include this portion of the mineralization and the SW extension. M12-03, -06 and -07 are located along the eastern edge of the main zone indicating that the mineralization is open both east and southward.

The holes selected for duplication represented the various geological environments present at Mousseau East ranging from the higher grade sections within the main zone to the satellite or marginal portions present outside. The primary objective of this program was to reproduce the historical results to confirm the accuracy both in the location of the previous holes and in the assaying. Logging of the core corroborated the geological setting where the graphite occurs for a large part at the interface between the quartzofeldspathic gneisses and the calcsilicate/marble units on the northeastern flank. The validation phase is essential to allow the use of the historical data for the calculation of a resource under the current NI43-101 norm.

MRB & Associates is now integrating the results in the database to allow the direct comparison with the historical diamond drill holes and to validate the results according to the strict internal QA/QC protocol. The weighted averages for intervals "or composite samples" were calculated from the preliminary results and these are presented in the table below.

------------------------------------------------------------------------
Depth
-------------------------- Intersection(i) Graphite
Drill Hole FROM (m) TO (m) (m) Cg %
------------------------------------------------------------------------
M12-01 16.1 69.0 52.9 7.50%
------------------------------------------------------------------------
including 16.1 39.0 22.9 12.92%
------------------------------------------------------------------------
including 48.4 69.0 20.6 4.65%
------------------------------------------------------------------------
M12-02 9.2 24.3 15.1 2.36%
------------------------------------------------------------------------
M12-02 34.1 40.6 6.5 9.77%
------------------------------------------------------------------------
M12-03 6.8 20.2 13.4 1.45%
------------------------------------------------------------------------
M12-03 25.2 44.1 18.9 9.72%
------------------------------------------------------------------------
M12-04 7.4 19.2 11.8 6.26%
------------------------------------------------------------------------
M12-04 32 61.9 29.9 8.31%
------------------------------------------------------------------------
M12-04 80.5 99.6 19.1 4.39%
------------------------------------------------------------------------
M12-04 103.1 105.0 1.9 1.95%
------------------------------------------------------------------------
M12-05 8.3 25.6 17.3 8.58%
------------------------------------------------------------------------
M12-06 1.3 16.4 15.1 7.90%
------------------------------------------------------------------------
M12-06 29.2 53.8 24.6 10.64%
------------------------------------------------------------------------
M12-07 8.1 23.6 15.5 11.16%
------------------------------------------------------------------------
M12-08 5.2 12.5 7.3 5.71%
------------------------------------------------------------------------
M12-08 29.8 42.1 12.3 6.26%
------------------------------------------------------------------------
M12-09 4.7 25.7 21 7.01%
------------------------------------------------------------------------
M12-10 8.8 24.1 15.3 11.62%
------------------------------------------------------------------------
M12-11 NSR(ii) NSR NSR NSR
------------------------------------------------------------------------
M12-12 23.0 25.8 2.8 7.50%
------------------------------------------------------------------------
(i) Measured intercept along core axis not necessarily representative
of true width.
(ii) No significant result

During the validation phase of the program, some 12 historical holes were duplicated representing approximately 20% of the original diamond-drill holes that served to calculate the historical resource. The confirmation drilling was planned in consultation with P&E Mining Consultants who will be responsible for the upcoming NI-43-101 Resource Estimate. Sampling including the addition standardized reference material and blanks was carried out at MRB's coreshack in Val-d'Or and samples were shipped to Act Labs of Ancaster, Ontario for graphitic carbon assaying. Drilling, logging and sampling are carried out under the supervision of MRB & Associates of Val-d'Or, Quebec who is also responsible for the sampling protocol.

The Mousseau East Property was acquired by Standard Graphite in April of 2012 (see press release April 24, 2012) and is located some 40 kilometres northeast of the town of Mont-Laurier in northwestern Quebec and within 50 kilometres of Timcal Canada Inc.'s producing Lac-des-Iles Graphite Mine, which is currently the larger of the two producing mines in North America.

Antoine Fournier P. Geo., manages Standard's exploration and development programs and is the Qualified Person as defined by National Instrument 43-101. He supervised the preparation of the technical information in this release.


About Standard Graphite

Standard Graphite Corp is focused exclusively on the exploration and development of a large portfolio of flake graphite properties in Canada. The company is rapidly positioning itself as North America's premier pure-play graphite exploration company and it controls 100% interest in 13 highly prospective graphite properties within known graphite districts in both Quebec and Ontario. An aggressive 2012 exploration strategy has commenced and will be implemented by a geologic team with the pedigree of a previous world-class graphite discovery.


ON BEHALF OF THE BOARD

Chris Bogart
President & CEO



Cautionary Statement:

The foregoing information may contain forward-looking statements relating to the future performance of Standard Graphite Corp. Forward-looking statements, specifically those concerned with future performance are subject to certain risks and uncertainties, and actual results may differ materially. These risks and uncertainties are detailed from time to time in [wp=1954]Standard Graphite Standard Graphite Corporation's filings with the appropriate securities commissions.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.




Contacts:

Standard Graphite Corporation
Chris Bogart, President & CEO
(604) 683-2509
(604) 683-2506 (FAX)
info@standardgraphite.com
www.standardgraphite.com
Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!



Mineninfo
Standard Graphite Corp.
Bergbau
-
-
Copyright © Minenportal.de 2006-2024 | MinenPortal.de ist eine Marke von GoldSeiten.de und Mitglied der GoldSeiten Mediengruppe
Alle Angaben ohne Gewähr! Es wird keinerlei Haftung für die Richtigkeit der Angaben und der Kurse übernommen!
Informationen zur Zeitverzögerung der Kursdaten und Börsenbedingungen. Kursdaten: Data Supplied by BSB-Software.