Richfield drills 72 m @ 1.69 g/t Au; 183 m @ 1.03 g/t Au; 206 m @ 1.56 g/t Au; 72 m @1.3 g/t Au; 91 m @ 1.07 g/t Au

QUESNEL, BC, Feb. 8 /CNW/ - Richfield Ventures Corp. (TSX.V: RVC) ("Richfield" or the "Company") is pleased to report drill results for the last seven holes drilled in 2010 on its 100% owned Blackwater Gold Project. The project is approximately 100 km south of Vanderhoof, BC.

Peter Bernier, RVC president comments "With all 2010 drill results now available including the 100 metre eastward extension in BW 112, a one kilometre mineralized zone from east to west is defined."

BW 116 intersected four mineralized intervals totaling 170 metres. One 12 metre section averages 7.73 g/t Au; a second section of 23 metres averages 2.20 g/t Au with 156.8 g/t Ag.

BW 115 also intersected gold; 13 metres averages 4.54 g/t Au and 16 metres averages 3.13 g/t Au. The five holes are on a west-east line and 350 metres apart in central parts of mineralization. From west to east the order is BW 114, BW 113, BW 111, BW 116 and BW 115.

BW 114 intersected 206 metres grading 1.56 g/t Au including 14 metres of 11.49 g/t Au.

BW 113 cut 183 metres grading 1.03 g/t Au. This includes four metres of 16.62 g/t Au. A 19 metre section near the bottom of this hole averages 4.30 g/t Au.

BW 112 was drilled well east of known mineralization, some 100 metres east of BW 90 (BW 90 cut 148 metres of 1.77 g/t Au with 39 metres of 3.06 g/t Au near the bottom - see NR Nov 23, 2010). BW 112 intersected gold values in the upper 150 metres with mineralization beginning directly below overburden. The best long section averages 2.74 g/t Au for a drill length of 39 metres.

BW 110 was drilled 150 metres south of the line of holes mentioned above and 50 metres north of BW 69. It cut 54 metres of 0.46 g/t Au immediately beneath overburden with another 18 metres grading 1.04 g/t Au deeper in the hole.

Drilling for the 2011 season resumed in late January with two drills. Richfield's board has approved a $15M budget for 2011 to include 30,000 metres of drilling. In addition Richfield has engaged a team of consultants to complete a Preliminary Economic Assessment (PEA) planned for fall 2011.

DDH  	From (m)   	To (m)   	Intvl (m) 	Au g/t   	Ag g/t  
BW 116    	6 	97 	91 	1.07 	7.8
incl 	81 	96 	15 	3.08 	15.9
BW 116 	116 	128 	12 	7.73 	8.3
BW 116 	167 	180 	13 	0.98 	3.5
BW 116 	188 	218 	30 	2.89 	10.0
incl 	204 	206 	2 	13.09 	17.4
BW 116 	277 	300 	23 	2.20 	156.8
BW 115 	100 	172 	72 	1.30 	6.8
incl 	151 	164 	13 	4.54 	6.8
BW 115 	254 	273 	19 	0.77 	2.8
BW 115 	290 	306 	16 	3.13 	5.3
BW 114 	6 	212 	206 	1.56 	4.2
incl 	6 	37 	31 	2.60 	13.3
and incl 	126 	140 	14 	11.49 	5.4
BW 114 	282 	314 	32 	0.53 	2.6
BW 114 	373 	382.52 	9.52 	0.85 	4.2
BW 113 	23 	206 	183 	1.03 	7.0
incl 	47 	51 	4 	16.62 	22.6
BW 113 	341 	360 	19 	4.30 	10.7
BW 112 	86 	129 	43 	0.45 	5.3
BW 112 	142 	181 	39 	2.74 	10.7
BW 112 	194 	214 	20 	0.63 	4.0
BW 112 	224 	241 	17 	0.35 	1.0
BW 111 	22 	26 	4 	1.17 	13.2
BW 111 	43 	62 	19 	0.62 	14.1
BW 111 	74 	96 	22 	0.41 	4.1
BW 111 	155 	168 	13 	0.62 	3.3
BW 111 	202 	234 	32 	0.67 	2.7
BW 110 	3 	57 	54 	0.46 	6.1
BW 110 	137 	155 	18 	1.04 	4.7

Drill map and strip logs for individual holes reported here will be posted on the company website.

Also see drilling results at http://www.corebox.net/properties/blackwater/index.php?deposit=510

Widths reported are drill widths; true widths are unknown. Assays are uncut, length-weighted average values.


Quality Assurance

Richfield has implemented a rigorous quality assurance/quality control program at the Blackwater property using best industry practice and supervised by Dirk Tempelman-Kluit. The program includes chain of custody of samples from drill to laboratory. Drill core is sawn in half at the property and for each sample half of the core from one metre intervals is placed in plastic bags and sealed. The remainder is retained in core boxes stored at the project camp.

A standard sample, a blank sample, or a duplicate sample is inserted into the sample stream every tenth sample. Three certified ore assay laboratory standards are used in the program, and are supplied by CDN Resource Laboratories Ltd., an independent laboratory located in Langley, BC. Samples including the blanks, standards and duplicates, are shipped by bonded courier to Eco Tech Stewart Group Laboratories in Kamloops, BC, an internationally recognized analytical services provider. Rejects selected at random are sent to Acme Labs of Vancouver, BC for check assays. In total 342 quality control samples (14.4 % of all 2372 samples) were analyzed. Richfield detected no significant QA/QC issues during review of the data.

The scientific and technical information contained in this news release was prepared under the supervision of Dirk Tempelman-Kluit Ph.D, FGAC, VP Exploration for Richfield Ventures Corp, and has been reviewed by Rob Pease P.Geo., who is a "Qualified Person" as defined under National Instrument 43-101.


On behalf of the Board of Directors of Richfield Ventures Corp.

"Peter Bernier"
Peter Bernier, President



Certain statements in this press release may be considered forward-looking information, including those relating to the "expectations", "intentions" or "plans" of the Company. Such information involves known and unknown risks, uncertainties and other factors -- including the approvals of regulators, availability of funds, the results of financing and exploration activities, the interpretation of drilling results and other geological data, project cost overruns or unanticipated costs and expenses and other risks identified by the Company in its public securities filings -- that may cause actual events to differ materially from current expectations. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this press release. The Company disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.



For further information:

Peter Bernier, President & CEO
Richfield Ventures Corp.
101-242 Reid Street
Quesnel, BC V2J 2M2
Toll Free: 1-877-992-6644
pete@richfieldventures.ca
www.richfieldventures.ca